#!/bin/bash

red='\e[91m'
green='\e[92m'
yellow='\e[93m'
magenta='\e[95m'
cyan='\e[96m'
none='\e[0m'

# Root
[[ $(id -u) != 0 ]] && echo -e " 哎呀……请使用 ${red}root ${none}用户运行 ${yellow}~(^_^) ${none}" && exit 1

cmd="apt-get"

sys_bit=$(uname -m)

if [[ $sys_bit == "i386" || $sys_bit == "i686" ]]; then
	v2ray_bit="32"
elif [[ $sys_bit == "x86_64" ]]; then
	v2ray_bit="64"
else
	echo -e " 哈哈……这个 ${red}辣鸡脚本${none} 不支持你的系统。 ${yellow}(-_-) ${none}" && exit 1
fi

# 笨笨的检测方法
if [[ -f /usr/bin/apt-get ]] || [[ -f /usr/bin/yum && -f /bin/systemctl ]]; then

	if [[ -f /usr/bin/yum ]]; then

		cmd="yum"

	fi
	if [[ -f /bin/systemctl ]]; then
		systemd=true
	fi

else

	echo -e " 哈哈……这个 ${red}辣鸡脚本${none} 不支持你的系统。 ${yellow}(-_-) ${none}" && exit 1

fi

uuid=$(cat /proc/sys/kernel/random/uuid)
old_id="23332333-2333-2333-2333-233boy233boy"
v2ray_server_config="/etc/v2ray/config.json"
v2ray_client_config="/etc/v2ray/233blog_v2ray_config.json"
backup="/etc/v2ray/233blog_v2ray_backup.conf"
_v2ray_sh="/usr/local/sbin/v2ray"

transport=(
	TCP
	TCP_HTTP
	WebSocket
	"WebSocket + TLS"
	mKCP
	mKCP_utp
	mKCP_srtp
	mKCP_wechat-video
	TCP_dynamicPort
	TCP_HTTP_dynamicPort
	WebSocket_dynamicPort
	mKCP_dynamicPort
	mKCP_utp_dynamicPort
	mKCP_srtp_dynamicPort
	mKCP_wechat-video_dynamicPort
	HTTP/2
	Socks5
)

ciphers=(
	aes-128-cfb
	aes-256-cfb
	chacha20
	chacha20-ietf
	aes-128-gcm
	aes-256-gcm
	chacha20-ietf-poly1305
)

v2ray_config() {
	# clear
	echo
	while :; do
		echo -e "请选择 "$yellow"V2Ray"$none" 传输协议 [${magenta}1-${#transport[*]}$none]"
		echo
		for ((i = 1; i <= ${#transport[*]}; i++)); do
			Stream="${transport[$i - 1]}"
			if [[ "$i" -le 9 ]]; then
				# echo
				echo -e "$yellow  $i. $none${Stream}"
			else
				# echo
				echo -e "$yellow $i. $none${Stream}"
			fi
		done
		echo
		echo "备注1: 含有 [dynamicPort] 的即启用动态端口.."
		echo "备注2: [utp | srtp | wechat-video] 分别为 伪装成 [BT下载 | 视频通话 | 微信视频通话]"
		echo
		read -p "$(echo -e "(默认协议: ${cyan}TCP$none)"):" v2ray_transport_opt
		[ -z "$v2ray_transport_opt" ] && v2ray_transport_opt=1
		case $v2ray_transport_opt in
		[1-9] | 1[0-7])
			echo
			echo
			echo -e "$yellow V2Ray 传输协议 = $cyan${transport[$v2ray_transport_opt - 1]}$none"
			echo "----------------------------------------------------------------"
			echo
			break
			;;
		*)
			error
			;;
		esac
	done
	v2ray_port_config
}
v2ray_port_config() {
	case $v2ray_transport_opt in
	[1-3] | [5-9] | 1[0-5] | 17)
		local random=$(shuf -i20001-65535 -n1)
		while :; do
			echo -e "请输入 "$yellow"V2Ray"$none" 端口 ["$magenta"1-65535"$none"]"
			read -p "$(echo -e "(默认端口: ${cyan}${random}$none):")" v2ray_port
			[ -z "$v2ray_port" ] && v2ray_port=$random
			case $v2ray_port in
			[1-9] | [1-9][0-9] | [1-9][0-9][0-9] | [1-9][0-9][0-9][0-9] | [1-5][0-9][0-9][0-9][0-9] | 6[0-4][0-9][0-9][0-9] | 65[0-4][0-9][0-9] | 655[0-3][0-5])
				echo
				echo
				echo -e "$yellow V2Ray 端口 = $cyan$v2ray_port$none"
				echo "----------------------------------------------------------------"
				echo
				break
				;;
			*)
				error
				;;
			esac
		done
		if [[ $v2ray_transport_opt -ge 9 && $v2ray_transport_opt -le 15 ]]; then
			v2ray_dynamic_port_start
		elif [[ $v2ray_transport_opt == 17 ]]; then
			socks_user_config
			socks_pass_config
		fi
		;;
	*)
		tls_config
		;;
	esac
}

v2ray_dynamic_port_start() {

	while :; do
		echo -e "请输入 "$yellow"V2Ray 动态端口开始 "$none"范围 ["$magenta"1-65535"$none"]"
		read -p "$(echo -e "(默认开始端口: ${cyan}10000$none):")" v2ray_dynamic_port_start_input
		[ -z $v2ray_dynamic_port_start_input ] && v2ray_dynamic_port_start_input=10000
		case $v2ray_dynamic_port_start_input in
		$v2ray_port)
			echo
			echo " 不能和 V2Ray 端口一毛一样...."
			echo
			echo -e " 当前 V2Ray 端口：${cyan}$v2ray_port${none}"
			error
			;;
		[1-9] | [1-9][0-9] | [1-9][0-9][0-9] | [1-9][0-9][0-9][0-9] | [1-5][0-9][0-9][0-9][0-9] | 6[0-4][0-9][0-9][0-9] | 65[0-4][0-9][0-9] | 655[0-3][0-5])
			echo
			echo
			echo -e "$yellow V2Ray 动态端口开始 = $cyan$v2ray_dynamic_port_start_input$none"
			echo "----------------------------------------------------------------"
			echo
			break
			;;
		*)
			error
			;;
		esac

	done

	if [[ $v2ray_dynamic_port_start_input -lt $v2ray_port ]]; then
		lt_v2ray_port=true
	fi

	v2ray_dynamic_port_end
}
v2ray_dynamic_port_end() {

	while :; do
		echo -e "请输入 "$yellow"V2Ray 动态端口结束 "$none"范围 ["$magenta"1-65535"$none"]"
		read -p "$(echo -e "(默认结束端口: ${cyan}20000$none):")" v2ray_dynamic_port_end_input
		[ -z $v2ray_dynamic_port_end_input ] && v2ray_dynamic_port_end_input=20000
		case $v2ray_dynamic_port_end_input in
		[1-9] | [1-9][0-9] | [1-9][0-9][0-9] | [1-9][0-9][0-9][0-9] | [1-5][0-9][0-9][0-9][0-9] | 6[0-4][0-9][0-9][0-9] | 65[0-4][0-9][0-9] | 655[0-3][0-5])

			if [[ $v2ray_dynamic_port_end_input -le $v2ray_dynamic_port_start_input ]]; then
				echo
				echo " 不能小于或等于 V2Ray 动态端口开始范围"
				echo
				echo -e " 当前 V2Ray 动态端口开始：${cyan}$v2ray_dynamic_port_start_input${none}"
				error
			elif [ $lt_v2ray_port ] && [[ ${v2ray_dynamic_port_end_input} -ge $v2ray_port ]]; then
				echo
				echo " V2Ray 动态端口结束范围 不能包括 V2Ray 端口..."
				echo
				echo -e " 当前 V2Ray 端口：${cyan}$v2ray_port${none}"
				error
			else
				echo
				echo
				echo -e "$yellow V2Ray 动态端口结束 = $cyan$v2ray_dynamic_port_end_input$none"
				echo "----------------------------------------------------------------"
				echo
				break
			fi
			;;
		*)
			error
			;;
		esac

	done

}

socks_user_config() {
	while :; do
		read -p "$(echo -e "请输入$yellow用户名$none...(默认用户名: ${cyan}233blog$none)"): " username
		[ -z "$username" ] && username="233blog"
		case $username in
		*[/$]* | *\&*)
			echo
			echo -e " 由于这个脚本太辣鸡了..所以用户名不能包含$red / $none或$red $ $none或$red & $none这三个符号.... "
			echo
			error
			;;
		*)
			echo
			echo
			echo -e "$yellow 用户名 = $cyan$username$none"
			echo "----------------------------------------------------------------"
			echo
			break
			;;
		esac
	done

}
socks_pass_config() {
	while :; do
		read -p "$(echo -e "请输入$yellow密码$none...(默认密码: ${cyan}233blog.com$none)"): " userpass
		[ -z "$userpass" ] && userpass="233blog.com"
		case $userpass in
		*[/$]* | *\&*)
			echo
			echo -e " 由于这个脚本太辣鸡了..所以密码不能包含$red / $none或$red $ $none或$red & $none这三个符号.... "
			echo
			error
			;;
		*)
			echo
			echo
			echo -e "$yellow 密码 = $cyan$userpass$none"
			echo "----------------------------------------------------------------"
			echo
			break
			;;
		esac
	done
}

tls_config() {

	echo
	local random=$(shuf -i20001-65535 -n1)
	while :; do
		echo -e "请输入 "$yellow"V2Ray"$none" 端口 ["$magenta"1-65535"$none"]，不能选择 "$magenta"80"$none" 或 "$magenta"443"$none" 端口"
		read -p "$(echo -e "(默认端口: ${cyan}${random}$none):")" v2ray_port
		[ -z "$v2ray_port" ] && v2ray_port=$random
		case $v2ray_port in
		80)
			echo
			echo " ...都说了不能选择 80 端口了咯....."
			error
			;;
		443)
			echo
			echo " ..都说了不能选择 443 端口了咯....."
			error
			;;
		[1-9] | [1-9][0-9] | [1-9][0-9][0-9] | [1-9][0-9][0-9][0-9] | [1-5][0-9][0-9][0-9][0-9] | 6[0-4][0-9][0-9][0-9] | 65[0-4][0-9][0-9] | 655[0-3][0-5])
			echo
			echo
			echo -e "$yellow V2Ray 端口 = $cyan$v2ray_port$none"
			echo "----------------------------------------------------------------"
			echo
			break
			;;
		*)
			error
			;;
		esac
	done

	while :; do
		echo
		echo -e "请输入一个 $magenta正确的域名$none，一定一定一定要正确，不！能！出！错！"
		read -p "(例如：233blog.com): " domain
		[ -z "$domain" ] && error && continue
		echo
		echo
		echo -e "$yellow 你的域名 = $cyan$domain$none"
		echo "----------------------------------------------------------------"
		break
	done
	get_ip
	echo
	echo
	echo -e "$yellow 请将 $magenta$domain$none $yellow解析到: $cyan$ip$none"
	echo
	echo -e "$yellow 请将 $magenta$domain$none $yellow解析到: $cyan$ip$none"
	echo
	echo -e "$yellow 请将 $magenta$domain$none $yellow解析到: $cyan$ip$none"
	echo "----------------------------------------------------------------"
	echo

	while :; do

		read -p "$(echo -e "(是否已经正确解析: [${magenta}Y$none]):") " record
		if [[ -z "$record" ]]; then
			error
		else
			if [[ "$record" == [Yy] ]]; then
				echo
				echo
				echo -e "$yellow 域名解析 = ${cyan}我确定已经有解析了$none"
				echo "----------------------------------------------------------------"
				echo
				break
			else
				error
			fi
		fi

	done

	if [[ $v2ray_transport_opt -ne 16 ]]; then
		auto_tls_config
	else
		caddy=true
		install_caddy_info="打开"
	fi

	if [[ $caddy ]]; then
		path_config_ask
	fi
}
auto_tls_config() {
	echo -e "

		安装 Caddy 来实现 自动配置 TLS
		
		如果你已经安装 Nginx 或 Caddy

		$yellow并且..自己能搞定配置 TLS$none

		那么就不需要 打开自动配置 TLS
		"
	echo "----------------------------------------------------------------"
	echo

	while :; do

		read -p "$(echo -e "(是否自动配置 TLS: [${magenta}Y/N$none]):") " auto_install_caddy
		if [[ -z "$auto_install_caddy" ]]; then
			error
		else
			if [[ "$auto_install_caddy" == [Yy] ]]; then
				caddy=true
				install_caddy_info="打开"
				echo
				echo
				echo -e "$yellow 自动配置 TLS = $cyan$install_caddy_info$none"
				echo "----------------------------------------------------------------"
				echo
				break
			elif [[ "$auto_install_caddy" == [Nn] ]]; then
				install_caddy_info="关闭"
				echo
				echo
				echo -e "$yellow 自动配置 TLS = $cyan$install_caddy_info$none"
				echo "----------------------------------------------------------------"
				echo
				break
			else
				error
			fi
		fi

	done
}
path_config_ask() {
	echo
	while :; do
		echo -e "是否开启 网站伪装 和 路径分流 [${magenta}Y/N$none]"
		read -p "$(echo -e "(默认: [${cyan}N$none]):")" is_path
		[[ -z $is_path ]] && is_path="n"

		case $is_path in
		Y | y)
			path_config
			break
			;;
		N | n)
			echo
			echo
			echo -e "$yellow 网站伪装 和 路径分流 = $cyan不想配置$none"
			echo "----------------------------------------------------------------"
			echo
			break
			;;
		*)
			error
			;;
		esac
	done
}
path_config() {
	echo
	while :; do
		echo -e "请输入想要 ${magenta}用来分流的路径$none , 例如 /233blog , 那么只需要输入 233blog 即可"
		read -p "$(echo -e "(默认: [${cyan}233blog$none]):")" path
		[[ -z $path ]] && path="233blog"

		case $path in
		*[/$]*)
			echo
			echo -e " 由于这个脚本太辣鸡了..所以分流的路径不能包含$red / $none或$red $ $none这两个符号.... "
			echo
			error
			;;
		*)
			echo
			echo
			echo -e "$yellow 分流的路径 = ${cyan}/${path}$none"
			echo "----------------------------------------------------------------"
			echo
			break
			;;
		esac
	done
	proxy_site_config
}
proxy_site_config() {
	echo
	while :; do
		echo -e "请输入 ${magenta}一个正确的$none ${cyan}网址$none 用来作为 ${cyan}网站的伪装$none , 例如 https://liyafly.com"
		echo -e "举例...你当前的域名是 $green$domain$none , 伪装的网址的是 https://liyafly.com"
		echo -e "然后打开你的域名时候...显示出来的内容就是来自 https://liyafly.com 的内容"
		echo -e "其实就是一个反代...明白就好..."
		echo -e "如果不能伪装成功...可以使用 v2ray config 修改伪装的网址"
		read -p "$(echo -e "(默认: [${cyan}https://liyafly.com$none]):")" proxy_site
		[[ -z $proxy_site ]] && proxy_site="https://liyafly.com"

		case $proxy_site in
		*[#$]*)
			echo
			echo -e " 由于这个脚本太辣鸡了..所以伪装的网址不能包含$red # $none或$red $ $none这两个符号.... "
			echo
			error
			;;
		*)
			echo
			echo
			echo -e "$yellow 伪装的网址 = ${cyan}${proxy_site}$none"
			echo "----------------------------------------------------------------"
			echo
			break
			;;
		esac
	done
}

blocked_hosts() {
	echo
	while :; do
		echo -e "是否开启广告拦截 [${magenta}Y/N$none]"
		read -p "$(echo -e "(默认 [${cyan}N$none]):")" blocked_ad
		[[ -z $blocked_ad ]] && blocked_ad="n"

		case $blocked_ad in
		Y | y)
			blocked_ad_info="开启"
			is_blocked_ad=true
			echo
			echo
			echo -e "$yellow 广告拦截 = $cyan开启$none"
			echo "----------------------------------------------------------------"
			echo
			break
			;;
		N | n)
			blocked_ad_info="关闭"
			echo
			echo
			echo -e "$yellow 广告拦截 = $cyan关闭$none"
			echo "----------------------------------------------------------------"
			echo
			break
			;;
		*)
			error
			;;
		esac
	done
}
shadowsocks_config() {

	echo

	while :; do
		echo -e "是否配置 ${yellow}Shadowsocks${none} [${magenta}Y/N$none]"
		read -p "$(echo -e "(默认 [${cyan}N$none]):") " install_shadowsocks
		[[ -z "$install_shadowsocks" ]] && install_shadowsocks="n"
		if [[ "$install_shadowsocks" == [Yy] ]]; then
			echo
			shadowsocks=true
			shadowsocks_port_config
			break
		elif [[ "$install_shadowsocks" == [Nn] ]]; then
			break
		else
			error
		fi

	done

}

shadowsocks_port_config() {
	local random=$(shuf -i20001-65535 -n1)
	while :; do
		echo -e "请输入 "$yellow"Shadowsocks"$none" 端口 ["$magenta"1-65535"$none"]，不能和 "$yellow"V2Ray"$none" 端口相同"
		read -p "$(echo -e "(默认端口: ${cyan}${random}$none):") " ssport
		[ -z "$ssport" ] && ssport=$random
		case $ssport in
		$v2ray_port)
			echo
			echo " 不能和 V2Ray 端口一毛一样...."
			error
			;;
		[1-9] | [1-9][0-9] | [1-9][0-9][0-9] | [1-9][0-9][0-9][0-9] | [1-5][0-9][0-9][0-9][0-9] | 6[0-4][0-9][0-9][0-9] | 65[0-4][0-9][0-9] | 655[0-3][0-5])
			if [[ $v2ray_transport_opt == "4" || $v2ray_transport_opt == "16" ]]; then
				local tls=ture
			fi
			if [[ $tls && $ssport == "80" ]] || [[ $tls && $ssport == "443" ]]; then
				echo
				echo -e "由于你已选择了 "$green"WebSocket + TLS $none或$green HTTP/2"$none" 传输协议."
				echo
				echo -e "所以不能选择 "$magenta"80"$none" 或 "$magenta"443"$none" 端口"
				error
			elif [[ $v2ray_dynamic_port_start_input == $ssport || $v2ray_dynamic_port_end_input == $ssport ]]; then
				local multi_port="${v2ray_dynamic_port_start_input} - ${v2ray_dynamic_port_end_input}"
				echo
				echo " 抱歉，此端口和 V2Ray 动态端口 冲突，当前 V2Ray 动态端口范围为：$multi_port"
				error
			elif [[ $v2ray_dynamic_port_start_input -lt $ssport && $ssport -le $v2ray_dynamic_port_end_input ]]; then
				local multi_port="${v2ray_dynamic_port_start_input} - ${v2ray_dynamic_port_end_input}"
				echo
				echo " 抱歉，此端口和 V2Ray 动态端口 冲突，当前 V2Ray 动态端口范围为：$multi_port"
				error
			else
				echo
				echo
				echo -e "$yellow Shadowsocks 端口 = $cyan$ssport$none"
				echo "----------------------------------------------------------------"
				echo
				break
			fi
			;;
		*)
			error
			;;
		esac

	done

	shadowsocks_password_config
}
shadowsocks_password_config() {

	while :; do
		echo -e "请输入 "$yellow"Shadowsocks"$none" 密码"
		read -p "$(echo -e "(默认密码: ${cyan}233blog.com$none)"): " sspass
		[ -z "$sspass" ] && sspass="233blog.com"
		case $sspass in
		*[/$]*)
			echo
			echo -e " 由于这个脚本太辣鸡了..所以密码不能包含$red / $none或$red $ $none这两个符号.... "
			echo
			error
			;;
		*)
			echo
			echo
			echo -e "$yellow Shadowsocks 密码 = $cyan$sspass$none"
			echo "----------------------------------------------------------------"
			echo
			break
			;;
		esac

	done

	shadowsocks_ciphers_config
}
shadowsocks_ciphers_config() {

	while :; do
		echo -e "请选择 "$yellow"Shadowsocks"$none" 加密协议 [${magenta}1-${#ciphers[*]}$none]"
		for ((i = 1; i <= ${#ciphers[*]}; i++)); do
			ciphers_show="${ciphers[$i - 1]}"
			echo
			echo -e "$yellow $i. $none${ciphers_show}"
		done
		echo
		read -p "$(echo -e "(默认加密协议: ${cyan}${ciphers[6]}$none)"):" ssciphers_opt
		[ -z "$ssciphers_opt" ] && ssciphers_opt=7
		case $ssciphers_opt in
		[1-7])
			ssciphers=${ciphers[$ssciphers_opt - 1]}
			echo
			echo
			echo -e "$yellow Shadowsocks 加密协议 = $cyan${ssciphers}$none"
			echo "----------------------------------------------------------------"
			echo
			break
			;;
		*)
			error
			;;
		esac

	done
	pause
}

install_info() {
	clear
	echo
	echo " ....准备安装了咯..看看有毛有配置正确了..."
	echo
	echo "---------- 安装信息 -------------"
	echo
	echo -e "$yellow V2Ray 传输协议 = $cyan${transport[$v2ray_transport_opt - 1]}$none"

	if [[ $v2ray_transport_opt == "4" || $v2ray_transport_opt == 16 ]]; then
		echo
		echo -e "$yellow V2Ray 端口 = $cyan$v2ray_port$none"
		echo
		echo -e "$yellow 你的域名 = $cyan$domain$none"
		echo
		echo -e "$yellow 域名解析 = ${cyan}我确定已经有解析了$none"
		echo
		echo -e "$yellow 自动配置 TLS = $cyan$install_caddy_info$none"

		if [[ $is_blocked_ad ]]; then
			echo
			echo -e "$yellow 广告拦截 = $cyan$blocked_ad_info$none"
		fi
		if [[ $path ]]; then
			echo
			echo -e "$yellow 路径分流 = ${cyan}/${path}$none"
		fi
	elif [[ $v2ray_transport_opt -ge 9 && $v2ray_transport_opt -le 15 ]]; then
		echo
		echo -e "$yellow V2Ray 端口 = $cyan$v2ray_port$none"
		echo
		echo -e "$yellow V2Ray 动态端口范围 = $cyan${v2ray_dynamic_port_start_input} - ${v2ray_dynamic_port_end_input}$none"

		if [[ $is_blocked_ad ]]; then
			echo
			echo -e "$yellow 广告拦截 = $cyan$blocked_ad_info$none"
		fi
	elif [[ $v2ray_transport_opt == 17 ]]; then
		echo
		echo -e "$yellow V2Ray 端口 = $cyan$v2ray_port$none"
		echo
		echo -e "$yellow 用户名 = $cyan$username$none"
		echo
		echo -e "$yellow 密码 = $cyan$userpass$none"

		if [[ $is_blocked_ad ]]; then
			echo
			echo -e "$yellow 广告拦截 = $cyan$blocked_ad_info$none"
		fi
	else
		echo
		echo -e "$yellow V2Ray 端口 = $cyan$v2ray_port$none"

		if [[ $is_blocked_ad ]]; then
			echo
			echo -e "$yellow 广告拦截 = $cyan$blocked_ad_info$none"
		fi
	fi
	if [ $shadowsocks ]; then
		echo
		echo -e "$yellow Shadowsocks 端口 = $cyan$ssport$none"
		echo
		echo -e "$yellow Shadowsocks 密码 = $cyan$sspass$none"
		echo
		echo -e "$yellow Shadowsocks 加密协议 = $cyan${ssciphers}$none"
	else
		echo
		echo -e "$yellow 是否配置 Shadowsocks = ${cyan}未配置${none}"
	fi
	echo
	echo "---------- END -------------"
	echo
	pause
	echo
}

domain_check() {
	# if [[ $cmd == "yum" ]]; then
	# 	yum install bind-utils -y
	# else
	# 	$cmd install dnsutils -y
	# fi
	# test_domain=$(dig $domain +short)
	test_domain=$(ping $domain -c 1 | grep -oE -m1 "([0-9]{1,3}\.){3}[0-9]{1,3}")
	if [[ $test_domain != $ip ]]; then
		echo
		echo -e "$red 检测域名解析错误....$none"
		echo
		echo -e " 你的域名: $yellow$domain$none 未解析到: $cyan$ip$none"
		echo
		echo -e " 你的域名当前解析到: $cyan$test_domain$none"
		echo
		echo "备注...如果你的域名是使用 Cloudflare 解析的话..在 Status 那里点一下那图标..让它变灰"
		echo
		exit 1
	fi
}

install_caddy() {
	local caddy_tmp="/tmp/install_caddy/"
	local caddy_tmp_file="/tmp/install_caddy/caddy.tar.gz"
	if [[ $sys_bit == "i386" || $sys_bit == "i686" ]]; then
		local caddy_download_link="https://caddyserver.com/download/linux/386?license=personal"
	elif [[ $sys_bit == "x86_64" ]]; then
		local caddy_download_link="https://caddyserver.com/download/linux/amd64?license=personal"
	else
		echo -e "$red 自动安装 Caddy 失败！不支持你的系统。$none" && exit 1
	fi

	mkdir -p $caddy_tmp

	if ! wget --no-check-certificate -O "$caddy_tmp_file" $caddy_download_link; then
		echo -e "$red 下载 Caddy 失败！$none" && exit 1
	fi

	tar zxf $caddy_tmp_file -C $caddy_tmp
	cp -f ${caddy_tmp}caddy /usr/local/bin/

	if [[ ! -f /usr/local/bin/caddy ]]; then
		echo -e "$red 安装 Caddy 出错！" && exit 1
	fi

	setcap CAP_NET_BIND_SERVICE=+eip /usr/local/bin/caddy

	if [[ $systemd ]]; then
		cp -f ${caddy_tmp}init/linux-systemd/caddy.service /lib/systemd/system/
		# sed -i "s/www-data/root/g" /lib/systemd/system/caddy.service
		sed -i "s/on-failure/always/" /lib/systemd/system/caddy.service
		systemctl enable caddy
	else
		cp -f ${caddy_tmp}init/linux-sysvinit/caddy /etc/init.d/caddy
		# sed -i "s/www-data/root/g" /etc/init.d/caddy
		chmod +x /etc/init.d/caddy
		update-rc.d -f caddy defaults
	fi

	mkdir -p /etc/ssl/caddy

	if [ -z "$(grep www-data /etc/passwd)" ]; then
		useradd -M -s /usr/sbin/nologin www-data
	fi
	chown -R www-data.www-data /etc/ssl/caddy

	mkdir -p /etc/caddy/
	rm -rf $caddy_tmp
	caddy_config

}
caddy_config() {
	# local email=$(shuf -i1-10000000000 -n1)
	local email=$(((RANDOM << 22)))
	case $v2ray_transport_opt in
	4)
		if [[ $path ]]; then
			cat >/etc/caddy/Caddyfile <<-EOF
$domain {
    tls ${email}@gmail.com
    gzip
	timeouts none
    proxy / $proxy_site {
        without /${path}
    }
    proxy /${path} 127.0.0.1:${v2ray_port} {
        without /${path}
        websocket
    }
}
		EOF
		else
			cat >/etc/caddy/Caddyfile <<-EOF
$domain {
    tls ${email}@gmail.com
	timeouts none
	proxy / 127.0.0.1:${v2ray_port} {
		websocket
	}
}
		EOF
		fi
		;;
	16)
		if [[ $path ]]; then
			cat >/etc/caddy/Caddyfile <<-EOF
$domain {
    tls ${email}@gmail.com
    gzip
	timeouts none
    proxy / $proxy_site {
        without /${path}
    }
    proxy /${path} https://127.0.0.1:${v2ray_port} {
        header_upstream Host {host}
		header_upstream X-Forwarded-Proto {scheme}
		insecure_skip_verify
    }
}
		EOF
		else
			cat >/etc/caddy/Caddyfile <<-EOF
$domain {
    tls ${email}@gmail.com
	timeouts none
	proxy / https://127.0.0.1:${v2ray_port} {
        header_upstream Host {host}
		header_upstream X-Forwarded-Proto {scheme}
		insecure_skip_verify
	}
}
		EOF
		fi
		;;

	esac

	# systemctl restart caddy
	do_service restart caddy
}

install_v2ray() {
	$cmd update -y
	# if [[ $cmd == "apt-get" ]]; then
	# 	$cmd install -y lrzsz git zip unzip curl wget qrencode dnsutils
	# else
	# 	$cmd install -y lrzsz git zip unzip curl wget qrencode bind-utils iptables-services
	# fi
	if [[ $cmd == "apt-get" ]]; then
		$cmd install -y lrzsz git zip unzip curl wget qrencode libcap2-bin
	else
		$cmd install -y lrzsz git zip unzip curl wget qrencode libcap iptables-services
	fi
	ln -sf /usr/share/zoneinfo/Asia/Shanghai /etc/localtime
	[ -d /etc/v2ray ] && rm -rf /etc/v2ray

	if [[ $local_install ]]; then
		if [[ ! -d $(pwd)/config ]]; then
			echo
			echo -e "$red 哎呀呀...安装失败了咯...$none"
			echo
			echo -e " 请确保你有完整的上传 v2ray66.com 的 V2Ray 一键安装脚本 & 管理脚本到当前 ${green}$(pwd) $none目录下"
			echo
			exit 1
		fi
		mkdir -p /etc/v2ray/233boy/v2ray
		cp -rf $(pwd)/* /etc/v2ray/233boy/v2ray
	else
		git clone https://github.com/233boy/v2ray /etc/v2ray/233boy/v2ray
	fi

	if [[ ! -d /etc/v2ray/233boy/v2ray ]]; then
		echo
		echo -e "$red 哎呀呀...克隆脚本仓库出错了...$none"
		echo
		echo -e " 温馨提示..... 请尝试自行安装 Git: ${green}$cmd install -y git $none 之后再安装此脚本"
		echo
		exit 1
	fi

	[ -d /tmp/v2ray ] && rm -rf /tmp/v2ray
	mkdir -p /tmp/v2ray

	v2ray_tmp_file="/tmp/v2ray/v2ray.zip"
	# v2ray_ver="$(curl -s https://api.github.com/repos/v2ray/v2ray-core/releases/latest | grep 'tag_name' | cut -d\" -f4)"
	v2ray_ver="v3.46"
	v2ray_download_link="https://github.com/v2ray/v2ray-core/releases/download/$v2ray_ver/v2ray-linux-${v2ray_bit}.zip"

	if ! wget --no-check-certificate -O "$v2ray_tmp_file" $v2ray_download_link; then
		echo -e "
        $red 下载 V2Ray 失败啦..可能是你的小鸡鸡的网络太辣鸡了...重新安装也许能解决$none
        " && exit 1
	fi

	unzip $v2ray_tmp_file -d "/tmp/v2ray/"
	mkdir -p /usr/bin/v2ray
	cp -f "/tmp/v2ray/v2ray-${v2ray_ver}-linux-${v2ray_bit}/v2ray" "/usr/bin/v2ray/v2ray"
	chmod +x "/usr/bin/v2ray/v2ray"
	cp -f "/tmp/v2ray/v2ray-${v2ray_ver}-linux-${v2ray_bit}/v2ctl" "/usr/bin/v2ray/v2ctl"
	chmod +x "/usr/bin/v2ray/v2ctl"

	if [[ $systemd ]]; then
		cp -f "/tmp/v2ray/v2ray-${v2ray_ver}-linux-${v2ray_bit}/systemd/v2ray.service" "/lib/systemd/system/"
		sed -i "s/on-failure/always/" /lib/systemd/system/v2ray.service
		systemctl enable v2ray
	else
		apt-get install -y daemon
		cp "/tmp/v2ray/v2ray-${v2ray_ver}-linux-${v2ray_bit}/systemv/v2ray" "/etc/init.d/v2ray"
		chmod +x "/etc/init.d/v2ray"
		update-rc.d -f v2ray defaults
	fi

	mkdir -p /var/log/v2ray
	mkdir -p /etc/v2ray

	rm -rf /tmp/v2ray

	if [ $shadowsocks ]; then
		if [[ $is_blocked_ad ]]; then
			case $v2ray_transport_opt in
			1)
				v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/tcp_ss.json"
				v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/tcp.json"
				;;
			2)
				v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/http_ss.json"
				v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/http.json"
				;;
			3)
				v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/ws_ss.json"
				v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws.json"
				;;
			4)
				v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/ws_ss.json"
				v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws_tls.json"
				;;
			5 | 6 | 7 | 8)
				v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/kcp_ss.json"
				v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/kcp.json"
				;;
			9)
				v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/tcp_ss_dynamic.json"
				v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/tcp.json"
				;;
			10)
				v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/http_ss_dynamic.json"
				v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/http.json"
				;;
			11)
				v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/ws_ss_dynamic.json"
				v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws.json"
				;;
			12 | 13 | 14 | 15)
				v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/kcp_ss_dynamic.json"
				v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/kcp.json"
				;;
			16)
				v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/h2_ss.json"
				v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/h2.json"
				;;
			17)
				v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/socks_ss.json"
				v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/socks.json"
				;;
			esac
		else
			case $v2ray_transport_opt in
			1)
				v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/tcp_ss.json"
				v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/tcp.json"
				;;
			2)
				v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/http_ss.json"
				v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/http.json"
				;;
			3)
				v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/ws_ss.json"
				v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws.json"
				;;
			4)
				v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/ws_ss.json"
				v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws_tls.json"
				;;
			5 | 6 | 7 | 8)
				v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/kcp_ss.json"
				v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/kcp.json"
				;;
			9)
				v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/tcp_ss_dynamic.json"
				v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/tcp.json"
				;;
			10)
				v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/http_ss_dynamic.json"
				v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/http.json"
				;;
			11)
				v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/ws_ss_dynamic.json"
				v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws.json"
				;;
			12 | 13 | 14 | 15)
				v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/kcp_ss_dynamic.json"
				v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/kcp.json"
				;;
			16)
				v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/h2_ss.json"
				v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/h2.json"
				;;
			17)
				v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/socks_ss.json"
				v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/socks.json"
				;;
			esac
		fi
	else
		if [[ $is_blocked_ad ]]; then
			case $v2ray_transport_opt in
			1)
				v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/tcp.json"
				v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/tcp.json"
				;;
			2)
				v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/http.json"
				v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/http.json"
				;;
			3)
				v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/ws.json"
				v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws.json"
				;;
			4)
				v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/ws.json"
				v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws_tls.json"
				;;
			5 | 6 | 7 | 8)
				v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/kcp.json"
				v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/kcp.json"
				;;
			9)
				v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/erver/tcp_dynamic.json"
				v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/tcp.json"
				;;
			10)
				v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/http_dynamic.json"
				v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/http.json"
				;;
			11)
				v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/ws_dynamic.json"
				v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws.json"
				;;
			12 | 13 | 14 | 15)
				v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/kcp_dynamic.json"
				v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/kcp.json"
				;;
			16)
				v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/h2.json"
				v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/h2.json"
				;;
			17)
				v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/blocked_hosts/server/socks.json"
				v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/socks.json"
				;;
			esac
		else
			case $v2ray_transport_opt in
			1)
				v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/tcp.json"
				v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/tcp.json"
				;;
			2)
				v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/http.json"
				v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/http.json"
				;;
			3)
				v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/ws.json"
				v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws.json"
				;;
			4)
				v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/ws.json"
				v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws_tls.json"
				;;
			5 | 6 | 7 | 8)
				v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/kcp.json"
				v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/kcp.json"
				;;
			9)
				v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/tcp_dynamic.json"
				v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/tcp.json"
				;;
			10)
				v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/http_dynamic.json"
				v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/http.json"
				;;
			11)
				v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/ws_dynamic.json"
				v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/ws.json"
				;;
			12 | 13 | 14 | 15)
				v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/kcp_dynamic.json"
				v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/kcp.json"
				;;
			16)
				v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/h2.json"
				v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/h2.json"
				;;
			17)
				v2ray_server_config_file="/etc/v2ray/233boy/v2ray/config/server/socks.json"
				v2ray_client_config_file="/etc/v2ray/233boy/v2ray/config/client/socks.json"
				;;
			esac
		fi

	fi

}

open_port() {
	if [[ $1 != "multiport" ]]; then

		iptables -I INPUT -m state --state NEW -m tcp -p tcp --dport $1 -j ACCEPT
		iptables -I INPUT -m state --state NEW -m udp -p udp --dport $1 -j ACCEPT
		ip6tables -I INPUT -m state --state NEW -m tcp -p tcp --dport $1 -j ACCEPT
		ip6tables -I INPUT -m state --state NEW -m udp -p udp --dport $1 -j ACCEPT

		# firewall-cmd --permanent --zone=public --add-port=$1/tcp
		# firewall-cmd --permanent --zone=public --add-port=$1/udp
		# firewall-cmd --reload

	else

		local multiport="${v2ray_dynamic_port_start_input}:${v2ray_dynamic_port_end_input}"
		iptables -I INPUT -p tcp --match multiport --dports $multiport -j ACCEPT
		iptables -I INPUT -p udp --match multiport --dports $multiport -j ACCEPT
		ip6tables -I INPUT -p tcp --match multiport --dports $multiport -j ACCEPT
		ip6tables -I INPUT -p udp --match multiport --dports $multiport -j ACCEPT

		# local multi_port="${v2ray_dynamic_port_start_input}-${v2ray_dynamic_port_end_input}"
		# firewall-cmd --permanent --zone=public --add-port=$multi_port/tcp
		# firewall-cmd --permanent --zone=public --add-port=$multi_port/udp
		# firewall-cmd --reload

	fi
	if [[ $cmd == "apt-get" ]]; then
		iptables-save >/etc/iptables.rules.v4
		ip6tables-save >/etc/iptables.rules.v6
	else
		service iptables save >/dev/null 2>&1
		service ip6tables save >/dev/null 2>&1
	fi
}
del_port() {
	if [[ $1 != "multiport" ]]; then
		# if [[ $cmd == "apt-get" ]]; then
		iptables -D INPUT -m state --state NEW -m tcp -p tcp --dport $1 -j ACCEPT
		iptables -D INPUT -m state --state NEW -m udp -p udp --dport $1 -j ACCEPT
		ip6tables -D INPUT -m state --state NEW -m tcp -p tcp --dport $1 -j ACCEPT
		ip6tables -D INPUT -m state --state NEW -m udp -p udp --dport $1 -j ACCEPT
		# else
		# 	firewall-cmd --permanent --zone=public --remove-port=$1/tcp
		# 	firewall-cmd --permanent --zone=public --remove-port=$1/udp
		# fi
	else
		# if [[ $cmd == "apt-get" ]]; then
		if [[ $v2ray_transport ]]; then
			local ports="${v2ray_dynamicPort_start}:${v2ray_dynamicPort_end}"
		else
			local port_start=$(sed -n '23p' $backup)
			local port_end=$(sed -n '25p' $backup)
			local ports="${port_start}:${port_end}"
		fi

		iptables -D INPUT -p tcp --match multiport --dports $ports -j ACCEPT
		iptables -D INPUT -p udp --match multiport --dports $ports -j ACCEPT
		ip6tables -D INPUT -p tcp --match multiport --dports $ports -j ACCEPT
		ip6tables -D INPUT -p udp --match multiport --dports $ports -j ACCEPT
		# else
		# 	local port_start=$(sed -n '23p' $backup)
		# 	local port_end=$(sed -n '25p' $backup)
		# 	local ports="${port_start}-${port_end}"
		# 	firewall-cmd --permanent --zone=public --remove-port=$ports/tcp
		# 	firewall-cmd --permanent --zone=public --remove-port=$ports/udp
		# fi
	fi

	if [[ $cmd == "apt-get" ]]; then
		iptables-save >/etc/iptables.rules.v4
		ip6tables-save >/etc/iptables.rules.v6
	else
		service iptables save >/dev/null 2>&1
		service ip6tables save >/dev/null 2>&1
	fi

}

config() {
	cp -f $v2ray_server_config_file $v2ray_server_config
	cp -f $v2ray_client_config_file $v2ray_client_config
	cp -f /etc/v2ray/233boy/v2ray/config/backup.conf $backup
	cp -f /etc/v2ray/233boy/v2ray/v2ray.sh $_v2ray_sh
	chmod +x $_v2ray_sh

	local multi_port="${v2ray_dynamic_port_start_input}-${v2ray_dynamic_port_end_input}"
	if [ $shadowsocks ]; then
		case $v2ray_transport_opt in
		1)
			sed -i "28s/6666/$ssport/; 30s/chacha20-ietf/$ssciphers/; 31s/233blog.com/$sspass/" $v2ray_server_config
			;;
		2)
			sed -i "64s/6666/$ssport/; 66s/chacha20-ietf/$ssciphers/; 67s/233blog.com/$sspass/" $v2ray_server_config
			;;
		3 | 4)
			sed -i "31s/6666/$ssport/; 33s/chacha20-ietf/$ssciphers/; 34s/233blog.com/$sspass/" $v2ray_server_config
			;;
		5 | 6 | 7 | 8)
			sed -i "43s/6666/$ssport/; 45s/chacha20-ietf/$ssciphers/; 46s/233blog.com/$sspass/" $v2ray_server_config
			;;
		9)
			sed -i "31s/6666/$ssport/; 33s/chacha20-ietf/$ssciphers/; 34s/233blog.com/$sspass/; 42s/10000-20000/$multi_port/" $v2ray_server_config
			;;
		10)
			sed -i "67s/6666/$ssport/; 69s/chacha20-ietf/$ssciphers/; 70s/233blog.com/$sspass/; 78s/10000-20000/$multi_port/" $v2ray_server_config
			;;
		1[1-5])
			sed -i "34s/6666/$ssport/; 36s/chacha20-ietf/$ssciphers/; 37s/233blog.com/$sspass/; 45s/10000-20000/$multi_port/" $v2ray_server_config
			;;
		16)
			sed -i "46s/6666/$ssport/; 48s/chacha20-ietf/$ssciphers/; 49s/233blog.com/$sspass/" $v2ray_server_config
			;;
		17)
			sed -i "30s/6666/$ssport/; 32s/chacha20-ietf/$ssciphers/; 33s/233blog.com/$sspass/" $v2ray_server_config
			;;
		esac

		case $v2ray_transport_opt in
		6)
			sed -i "31s/none/utp/" $v2ray_server_config
			sed -i "44s/none/utp/" $v2ray_client_config
			;;
		7)
			sed -i "31s/none/srtp/" $v2ray_server_config
			sed -i "44s/none/srtp/" $v2ray_client_config
			;;
		8)
			sed -i "31s/none/wechat-video/" $v2ray_server_config
			sed -i "44s/none/wechat-video/" $v2ray_client_config
			;;
		13)
			sed -i "74s/none/utp/" $v2ray_server_config
			sed -i "44s/none/utp/" $v2ray_client_config
			;;
		14)
			sed -i "74s/none/srtp/" $v2ray_server_config
			sed -i "44s/none/srtp/" $v2ray_client_config
			;;
		15)
			sed -i "74s/none/wechat-video/" $v2ray_server_config
			sed -i "44s/none/wechat-video/" $v2ray_client_config
			;;
		esac

	else
		case $v2ray_transport_opt in
		9)
			sed -i "31s/10000-20000/$multi_port/" $v2ray_server_config
			;;
		10)
			sed -i "67s/10000-20000/$multi_port/" $v2ray_server_config
			;;
		1[1-5])
			sed -i "34s/10000-20000/$multi_port/" $v2ray_server_config
			;;
		esac

		case $v2ray_transport_opt in
		6)
			sed -i "31s/none/utp/" $v2ray_server_config
			sed -i "44s/none/utp/" $v2ray_client_config
			;;
		7)
			sed -i "31s/none/srtp/" $v2ray_server_config
			sed -i "44s/none/srtp/" $v2ray_client_config
			;;
		8)
			sed -i "31s/none/wechat-video/" $v2ray_server_config
			sed -i "44s/none/wechat-video/" $v2ray_client_config
			;;
		13)
			sed -i "63s/none/utp/" $v2ray_server_config
			sed -i "44s/none/utp/" $v2ray_client_config
			;;
		14)
			sed -i "63s/none/srtp/" $v2ray_server_config
			sed -i "44s/none/srtp/" $v2ray_client_config
			;;
		15)
			sed -i "63s/none/wechat-video/" $v2ray_server_config
			sed -i "44s/none/wechat-video/" $v2ray_client_config
			;;
		esac

	fi

	if [[ $v2ray_transport_opt == 17 ]]; then
		sed -i "8s/2333/$v2ray_port/; 14s/233blog/$username/; 15s/233blog.com/$userpass/" $v2ray_server_config
	else
		sed -i "8s/2333/$v2ray_port/; 14s/$old_id/$uuid/" $v2ray_server_config
	fi

	if [[ $v2ray_transport_opt -eq 16 ]]; then
		sed -i "24s/233blog.com/$domain/" $v2ray_server_config
		if [[ $path ]]; then
			sed -i "26s/233blog/$path/" $v2ray_server_config
		else
			sed -i "26s/233blog//" $v2ray_server_config
		fi
	fi

	if [[ $v2ray_transport_opt -eq 4 || $v2ray_transport_opt -eq 16 ]]; then
		sed -i "s/233blog.com/$domain/; 22s/2333/443/; 25s/$old_id/$uuid/" $v2ray_client_config
		if [[ $path ]]; then
			sed -i "40s/233blog/$path/" $v2ray_client_config
		else
			sed -i "40s/233blog//" $v2ray_client_config
		fi
	elif [[ $v2ray_transport_opt == 17 ]]; then
		sed -i "21s/233blog.com/$ip/; 22s/2333/$v2ray_port/; 25s/233blog/$username/; 26s/233blog.com/$userpass/" $v2ray_client_config
	else
		sed -i "s/233blog.com/$ip/; 22s/2333/$v2ray_port/; 25s/$old_id/$uuid/" $v2ray_client_config
	fi

	# zip -q -r -j --password "233blog.com" /etc/v2ray/233blog_v2ray.zip $v2ray_client_config

	if [[ $cmd == "apt-get" ]]; then
		cat >/etc/network/if-pre-up.d/iptables <<-EOF
#!/bin/sh
/sbin/iptables-restore < /etc/iptables.rules.v4
/sbin/ip6tables-restore < /etc/iptables.rules.v6
	EOF
		chmod +x /etc/network/if-pre-up.d/iptables
	else
		[ $(pgrep "firewall") ] && systemctl stop firewalld
		systemctl mask firewalld
		systemctl disable firewalld
		systemctl enable iptables
		systemctl enable ip6tables
		systemctl start iptables
		systemctl start ip6tables
	fi

	[ $shadowsocks ] && open_port $ssport
	if [[ $v2ray_transport_opt == "4" || $v2ray_transport_opt == 16 ]]; then
		open_port "80"
		open_port "443"
		open_port $v2ray_port
	elif [[ $v2ray_transport_opt -ge 9 && $v2ray_transport_opt -le 15 ]]; then
		open_port $v2ray_port
		open_port "multiport"
	else
		open_port $v2ray_port
	fi
	# systemctl restart v2ray
	do_service restart v2ray
	backup_config

}

backup_config() {
	sed -i "18s/=1/=$v2ray_transport_opt/; 21s/=2333/=$v2ray_port/; 24s/=$old_id/=$uuid/" $backup
	if [[ $v2ray_transport_opt -ge 9 && $v2ray_transport_opt -le 15 ]]; then
		sed -i "30s/=10000/=$v2ray_dynamic_port_start_input/; 33s/=20000/=$v2ray_dynamic_port_end_input/" $backup
	fi
	if [ $shadowsocks ]; then
		sed -i "42s/=/=true/; 45s/=6666/=$ssport/; 48s/=233blog.com/=$sspass/; 51s/=chacha20-ietf/=$ssciphers/" $backup
	fi
	[[ $v2ray_transport_opt == "4" || $v2ray_transport_opt == 16 ]] && sed -i "36s/=233blog.com/=$domain/" $backup
	[ $caddy ] && sed -i "39s/=/=true/" $backup
	[ $is_blocked_ad ] && sed -i "54s/=/=true/" $backup
	if [[ $path ]]; then
		sed -i "57s/=/=true/; 60s/=233blog/=$path/" $backup
		sed -i "63s#=https://liyafly.com#=$proxy_site#" $backup
	fi
	if [[ $v2ray_transport_opt == 17 ]]; then
		sed -i "66s/=233blog/=$username/; 69s/=233blog.com/=$userpass/" $backup
	fi
}

try_enable_bbr() {
	if [[ $(uname -r | cut -b 1) -eq 4 ]]; then
		case $(uname -r | cut -b 3-4) in
		9. | [1-9][0-9])
			sed -i '/net.ipv4.tcp_congestion_control/d' /etc/sysctl.conf
			sed -i '/net.core.default_qdisc/d' /etc/sysctl.conf
			echo "net.ipv4.tcp_congestion_control = bbr" >>/etc/sysctl.conf
			echo "net.core.default_qdisc = fq" >>/etc/sysctl.conf
			sysctl -p >/dev/null 2>&1
			;;
		esac
	fi
}

get_ip() {
	ip=$(curl -s ipinfo.io/ip)
}

error() {

	echo -e "\n$red 输入错误！$none\n"

}

pause() {

	read -rsp "$(echo -e "按$green Enter 回车键 $none继续....或按$red Ctrl + C $none取消.")" -d $'\n'
	echo
}
do_service() {
	if [[ $systemd ]]; then
		systemctl $1 $2
	else
		service $2 $1
	fi
}
show_config_info() {
	local header="none"
	if [[ $path ]]; then
		local _path="/$path"
	else
		local _path="/"
	fi

	case $v2ray_transport_opt in
	1 | 9)
		local net="tcp"
		# local network="tcp"
		# local obfs="none"
		;;
	2 | 10)
		local net="tcp"
		# local network="tcp"
		local header="http"
		local host="www.baidu.com"
		# local obfs="http"
		;;
	3 | 4 | 11)
		local net="ws"
		# local network="ws"
		# local obfs="websocket"
		;;
	5 | 12)
		local net="kcp"
		# local network="kcp"
		;;
	6 | 13)
		local net="kcp"
		# local network="kcp"
		local header="utp"
		;;
	7 | 14)
		local net="kcp"
		# local network="kcp"
		local header="srtp"
		;;
	8 | 15)
		local net="kcp"
		# local network="kcp"
		local header="wechat-video"
		;;
	16)
		local net="h2"
		# local network="h2"
		;;
	esac
	if [[ $v2ray_transport_opt == "4" || $v2ray_transport_opt == 16 ]]; then
		cat >/etc/v2ray/vmess_qr.json <<-EOF
		{
			"v": "2",
			"ps": "v2ray66.com_${domain}",
			"add": "${domain}",
			"port": "443",
			"id": "${uuid}",
			"aid": "233",
			"net": "${net}",
			"type": "none",
			"host": "${domain}",
			"path": "$_path",
			"tls": "tls"
		}
		EOF
	elif [[ $v2ray_transport_opt != 17 ]]; then
		cat >/etc/v2ray/vmess_qr.json <<-EOF
		{
			"v": "2",
			"ps": "v2ray66.com_${ip}",
			"add": "${ip}",
			"port": "${v2ray_port}",
			"id": "${uuid}",
			"aid": "233",
			"net": "${net}",
			"type": "${header}",
			"host": "${host}",
			"path": "",
			"tls": ""
		}
		EOF
	fi
	clear
	echo
	echo "---------- V2Ray 安装完成 -------------"
	echo
	echo -e " $yellow输入 ${cyan}v2ray${none} $yellow即可管理 V2Ray${none}"
	echo
	echo -e " ${yellow}V2Ray 客户端使用教程: https://v2ray66.com/post/4/$none"
	echo
	if [[ $v2ray_transport_opt == "4" && ! $caddy ]]; then
		echo -e " $red警告！$none$yellow请自行配置 TLS...教程: https://v2ray66.com/post/3/$none"
		echo
	fi
	echo "---------- V2Ray 配置信息 -------------"
	if [[ $v2ray_transport_opt == "4" || $v2ray_transport_opt == 16 ]]; then
		echo
		echo -e "$yellow 地址 (Address) = $cyan${domain}$none"
		echo
		echo -e "$yellow 端口 (Port) = ${cyan}443${none}"
		echo
		echo -e "$yellow 用户ID (User ID / UUID) = $cyan${uuid}$none"
		echo
		echo -e "$yellow 额外ID (Alter Id) = ${cyan}233${none}"
		echo
		echo -e "$yellow 传输协议 (Network) = ${cyan}${net}$none"
		echo
		echo -e "$yellow 伪装类型 (header type) = ${cyan}${header}$none"
		echo
		echo -e "$yellow 伪装域名 (host) = ${cyan}${domain}$none"
		echo
		echo -e "$yellow 路径 (path) = ${cyan}${_path}$none"
		echo
		echo -e "$yellow TLS (Enable TLS) = ${cyan}打开$none"
		echo
	elif [[ $v2ray_transport_opt == 17 ]]; then
		echo
		echo -e "$yellow 主机 (Hostname) = $cyan${ip}$none"
		echo
		echo -e "$yellow 端口 (Port) = $cyan$v2ray_port$none"
		echo
		echo -e "$yellow 用户名 (Username) = $cyan${username}$none"
		echo
		echo -e "$yellow 密码 (Password) = $cyan${userpass}$none"
		echo
		echo -e "$yellow Telegram 代理配置链接 = ${cyan}tg://socks?server=${ip}&port=${v2ray_port}&user=${username}&pass=${userpass}$none"
		echo
		echo " 这是 Socks5 协议相关的配置啦.... 不用在乎一些 V2Ray 客户端 怎么没有这些东东配置的"
		echo
	else
		echo
		echo -e "$yellow 地址 (Address) = $cyan${ip}$none"
		echo
		echo -e "$yellow 端口 (Port) = $cyan$v2ray_port$none"
		echo
		echo -e "$yellow 用户ID (User ID / UUID) = $cyan${uuid}$none"
		echo
		echo -e "$yellow 额外ID (Alter Id) = ${cyan}233${none}"
		echo
		echo -e "$yellow 传输协议 (Network) = ${cyan}${net}$none"
		echo
		echo -e "$yellow 伪装类型 (header type) = ${cyan}${header}$none"
		echo
	fi
	if [[ $v2ray_transport_opt -ge 9 && $v2ray_transport_opt -le 15 ]] && [[ $is_blocked_ad ]]; then
		echo " 备注: 动态端口已启用...广告拦截已开启..."
		echo
	elif [[ $v2ray_transport_opt -ge 9 && $v2ray_transport_opt -le 15 ]]; then
		echo " 备注: 动态端口已启用..."
		echo
	elif [[ $is_blocked_ad ]]; then
		echo " 备注: 广告拦截已开启.."
		echo
	fi
	if [ $shadowsocks ]; then
		local ss="ss://$(echo -n "${ssciphers}:${sspass}@${ip}:${ssport}" | base64 -w 0)#v2ray66.com_ss_${ip}"
		echo
		echo "---------- Shadowsocks 配置信息 -------------"
		echo
		echo -e "$yellow 服务器地址 = $cyan${ip}$none"
		echo
		echo -e "$yellow 服务器端口 = $cyan$ssport$none"
		echo
		echo -e "$yellow 密码 = $cyan$sspass$none"
		echo
		echo -e "$yellow 加密协议 = $cyan${ssciphers}$none"
		echo
		echo -e "$yellow SS 链接 = ${cyan}$ss$none"
		echo
		echo -e " 备注:$red Shadowsocks Win 4.0.6 $none客户端可能无法识别该 SS 链接"
		echo
		if [[ $v2ray_transport_opt == 17 ]]; then
			echo -e " 温馨提示: 使用${cyan} v2ray ssqr ${none}即可生成 Shadowsocks 配置信息二维码"
			echo
		fi
	fi

}
create_qr_link_ask() {
	if [[ $shadowsocks && $v2ray_transport_opt != 17 ]]; then
		echo
		while :; do
			echo -e "是否需要生成$yellow V2Ray 和 Shadowsocks $none配置信息二维码链接 [${magenta}Y/N$none]"
			read -p "$(echo -e "默认 [${magenta}N$none]:")" y_n
			[ -z $y_n ] && y_n="n"
			if [[ $y_n == [Yy] ]]; then
				get_qr_link 1
				break
			elif [[ $y_n == [Nn] ]]; then
				rm -rf /etc/v2ray/vmess_qr.json
				# rm -rf /etc/v2ray/shadowray_qr.txt
				break
			else
				error
			fi
		done
	elif [[ $v2ray_transport_opt != 17 ]]; then
		echo
		while :; do
			echo -e "是否需要生成$yellow V2Ray 配置信息 $none二维码链接 [${magenta}Y/N$none]"
			read -p "$(echo -e "默认 [${magenta}N$none]:")" y_n
			[ -z $y_n ] && y_n="n"
			if [[ $y_n == [Yy] ]]; then
				get_qr_link
				break
			elif [[ $y_n == [Nn] ]]; then
				rm -rf /etc/v2ray/vmess_qr.json
				# rm -rf /etc/v2ray/shadowray_qr.txt
				break
			else
				error
			fi
		done
	fi
}
get_qr_link() {

	echo
	echo -e "$green 正在生成链接.... 稍等片刻即可....$none"
	echo

	if [[ $1 ]]; then
		local random1=$(echo $RANDOM-$RANDOM-$RANDOM | base64 -w 0)
		local random2=$(echo $RANDOM-$RANDOM-$RANDOM | base64 -w 0)
		local vmess="vmess://$(cat /etc/v2ray/vmess_qr.json | tr -d '\n' | base64 -w 0)"
		echo $vmess | tr -d '\n' >/etc/v2ray/vmess.txt
		cat /etc/v2ray/vmess.txt | qrencode -s 50 -o /tmp/233blog_v2ray.png
		local link1=$(curl -s --upload-file /tmp/233blog_v2ray.png "https://transfer.sh/${random1}_v2ray666_v2ray.png")
		local ss="ss://$(echo -n "${ssciphers}:${sspass}@${ip}:${ssport}" | base64 -w 0)#v2ray66.com_ss_${ip}"
		echo "${ss}" >/tmp/233blog_shadowsocks.txt
		cat /tmp/233blog_shadowsocks.txt | qrencode -s 50 -o /tmp/233blog_shadowsocks.png
		local link2=$(curl -s --upload-file /tmp/233blog_shadowsocks.png "https://transfer.sh/${random2}_v2ray666_shadowsocks.png")
		if [[ $link1 && $link2 ]]; then
			echo
			echo "---------- V2Ray 二维码链接 -------------"
			echo
			echo -e "$yellow 适用于 V2RayNG v0.4.1+ / Kitsunebi = $cyan${link1}$none"
			echo
			echo
			echo -e "$red 友情提醒: 请务必核对扫码结果 (V2RayNG 除外) $none"
			echo
			echo
			echo "---------- Shadowsocks 二维码链接 -------------"
			echo
			echo -e "$yellow 链接 = $cyan${link2}$none"
			echo
			echo -e " 温馨提示...$red Shadowsocks Win 4.0.6 $none客户端可能无法识别该二维码"
			echo
			echo
			echo "----------------------------------------------------------------"
			echo
			echo "备注...链接将在 14 天后失效"
			echo
			echo "提醒...请不要把链接分享出去...除非你有特别的理由...."
			echo
		else
			echo
			echo -e "$red 哎呀呀呀...出错咯...$none"
			echo
			echo -e " 请尝试使用${cyan} v2ray qr ${none}生成 V2Ray 配置信息二维码"
			echo
			echo -e " 请尝试使用${cyan} v2ray ssqr ${none}生成 Shadowsocks 配置信息二维码"
			echo
		fi

		rm -rf /tmp/233blog_shadowsocks.png
		rm -rf /tmp/233blog_shadowsocks.txt
	else
		local random1=$(echo $RANDOM-$RANDOM-$RANDOM | base64 -w 0)
		local vmess="vmess://$(cat /etc/v2ray/vmess_qr.json | tr -d '\n' | base64 -w 0)"
		echo $vmess | tr -d '\n' >/etc/v2ray/vmess.txt
		cat /etc/v2ray/vmess.txt | qrencode -s 50 -o /tmp/233blog_v2ray.png
		local link1=$(curl -s --upload-file /tmp/233blog_v2ray.png "https://transfer.sh/${random1}_v2ray666_v2ray.png")

		if [[ $link1 ]]; then
			echo
			echo "---------- V2Ray 二维码链接 -------------"
			echo
			echo -e "$yellow 适用于 V2RayNG v0.4.1+ / Kitsunebi = $cyan${link1}$none"
			echo
			echo
			echo -e "$red 友情提醒: 请务必核对扫码结果 (V2RayNG 除外) $none"
			echo
			echo
			echo "----------------------------------------------------------------"
			echo
			echo "备注...链接将在 14 天后失效"
			echo
			echo "提醒...请不要把链接分享出去...除非你有特别的理由...."
			echo
		else
			echo
			echo -e "$red 哎呀呀呀...出错咯...请重试$none"
			echo
			echo -e " 请尝试使用${cyan} v2ray qr ${none}生成 V2Ray 配置信息二维码"
			echo
		fi
	fi

	rm -rf /tmp/233blog_v2ray.png
	rm -rf /etc/v2ray/vmess_qr.json
	rm -rf /etc/v2ray/vmess.txt

}

install() {
	if [[ -f /usr/bin/v2ray/v2ray && -f /etc/v2ray/config.json ]] && [[ -f $backup && -d /etc/v2ray/233boy/v2ray ]]; then
		echo
		echo " 大佬...你已经安装 V2Ray 啦...无需重新安装"
		echo
		echo -e " $yellow输入 ${cyan}v2ray${none} $yellow即可管理 V2Ray${none}"
		echo
		exit 1
	elif [[ -f /usr/bin/v2ray/v2ray && -f /etc/v2ray/config.json ]] && [[ -f /etc/v2ray/233blog_v2ray_backup.txt && -d /etc/v2ray/233boy/v2ray ]]; then
		echo
		echo " 大佬... 如果你需要继续安装.. 请先卸载旧版本"
		echo
		echo -e " $yellow输入 ${cyan}v2ray uninstall${none} $yellow即可卸载${none}"
		echo
		exit 1
	fi
	v2ray_config
	blocked_hosts
	shadowsocks_config
	install_info
	try_enable_bbr
	[ $caddy ] && domain_check
	install_v2ray
	if [[ $caddy || $v2ray_port == "80" ]]; then
		if [[ $cmd == "yum" ]]; then
			[[ $(pgrep "httpd") ]] && systemctl stop httpd
			[[ $(command -v httpd) ]] && yum remove httpd -y
		else
			[[ $(pgrep "apache2") ]] && service apache2 stop
			[[ $(command -v apache2) ]] && apt-get remove apache2* -y
		fi
	fi
	[ $caddy ] && install_caddy
	get_ip
	config
	show_config_info
	create_qr_link_ask
}
uninstall() {

	if [[ -f /usr/bin/v2ray/v2ray && -f /etc/v2ray/config.json ]] && [[ -f $backup && -d /etc/v2ray/233boy/v2ray ]]; then
		. $backup
		while :; do
			echo
			read -p "$(echo -e "是否卸载 ${yellow}V2Ray$none [${magenta}Y/N$none]:")" uninstall_v2ray_ask
			if [[ -z $uninstall_v2ray_ask ]]; then
				error
			else
				case $uninstall_v2ray_ask in
				Y | y)
					is_uninstall_v2ray=true
					echo
					echo -e "$yellow 卸载 V2Ray = ${cyan}是${none}"
					echo
					break
					;;
				N | n)
					echo
					echo -e "$red 卸载已取消...$none"
					echo
					break
					;;
				*)
					error
					;;
				esac
			fi
		done

		if [[ $caddy_status ]] && [[ -f /usr/local/bin/caddy && -f /etc/caddy/Caddyfile ]]; then
			while :; do
				echo
				read -p "$(echo -e "是否卸载 ${yellow}Caddy$none [${magenta}Y/N$none]:")" uninstall_caddy_ask
				if [[ -z $uninstall_caddy_ask ]]; then
					error
				else
					case $uninstall_caddy_ask in
					Y | y)
						is_uninstall_caddy=true
						echo
						echo -e "$yellow 卸载 Caddy = ${cyan}是${none}"
						echo
						break
						;;
					N | n)
						echo
						echo -e "$yellow 卸载 Caddy = ${cyan}否${none}"
						echo
						break
						;;
					*)
						error
						;;
					esac
				fi
			done
		fi

		if [[ $is_uninstall_v2ray && $is_uninstall_caddy ]]; then
			pause
			echo

			if [[ $shadowsocks_status ]]; then
				del_port $ssport
			fi

			if [[ $v2ray_transport == "4" || $v2ray_transport == 16 ]]; then
				del_port "80"
				del_port "443"
				del_port $v2ray_port
			elif [[ $v2ray_transport -ge 9 && $v2ray_transport -le 15 ]]; then
				del_port $v2ray_port
				del_port "multiport"
			else
				del_port $v2ray_port
			fi

			[ $cmd == "apt-get" ] && rm -rf /etc/network/if-pre-up.d/iptables

			v2ray_pid=$(ps ux | grep "/usr/bin/v2ray/v2ray" | grep -v grep | awk '{print $2}')
			# [ $v2ray_pid ] && systemctl stop v2ray
			[ $v2ray_pid ] && do_service stop v2ray

			rm -rf /usr/bin/v2ray
			rm -rf $_v2ray_sh
			rm -rf /etc/v2ray
			rm -rf /var/log/v2ray

			caddy_pid=$(pgrep "caddy")
			# [ $caddy_pid ] && systemctl stop caddy
			[ $caddy_pid ] && do_service stop caddy
			rm -rf /usr/local/bin/caddy
			rm -rf /etc/caddy
			rm -rf /etc/ssl/caddy

			if [[ $systemd ]]; then
				systemctl disable v2ray >/dev/null 2>&1
				rm -rf /lib/systemd/system/v2ray.service
				systemctl disable caddy >/dev/null 2>&1
				rm -rf /lib/systemd/system/caddy.service
			else
				update-rc.d -f caddy remove >/dev/null 2>&1
				update-rc.d -f v2ray remove >/dev/null 2>&1
				rm -rf /etc/init.d/caddy
				rm -rf /etc/init.d/v2ray
			fi

			# clear
			echo
			echo -e "$green V2Ray 卸载完成啦 ....$none"
			echo
			echo "如果你觉得这个脚本有哪些地方不够好的话...请告诉我"
			echo
			echo "反馈问题: https://github.com/233boy/v2ray/issus"
			echo

		elif [[ $is_uninstall_v2ray ]]; then
			pause
			echo

			if [[ $shadowsocks_status ]]; then
				del_port $ssport
			fi

			if [[ $v2ray_transport == "4" || $v2ray_transport == 16 ]]; then
				del_port "80"
				del_port "443"
				del_port $v2ray_port
			elif [[ $v2ray_transport -ge 9 && $v2ray_transport -le 15 ]]; then
				del_port $v2ray_port
				del_port "multiport"
			else
				del_port $v2ray_port
			fi

			[ $cmd == "apt-get" ] && rm -rf /etc/network/if-pre-up.d/iptables

			v2ray_pid=$(ps ux | grep "/usr/bin/v2ray/v2ray" | grep -v grep | awk '{print $2}')
			# [ $v2ray_pid ] && systemctl stop v2ray
			[ $v2ray_pid ] && do_service stop v2ray
			rm -rf /usr/bin/v2ray
			rm -rf $_v2ray_sh
			rm -rf /etc/v2ray
			rm -rf /var/log/v2ray
			if [[ $systemd ]]; then
				systemctl disable v2ray >/dev/null 2>&1
				rm -rf /lib/systemd/system/v2ray.service
			else
				update-rc.d -f v2ray remove >/dev/null 2>&1
				rm -rf /etc/init.d/v2ray
			fi
			# clear
			echo
			echo -e "$green V2Ray 卸载完成啦 ....$none"
			echo
			echo "如果你觉得这个脚本有哪些地方不够好的话...请告诉我"
			echo
			echo "反馈问题: https://github.com/233boy/v2ray/issus"
			echo

		fi
	elif [[ -f /usr/bin/v2ray/v2ray && -f /etc/v2ray/config.json ]] && [[ -f /etc/v2ray/233blog_v2ray_backup.txt && -d /etc/v2ray/233boy/v2ray ]]; then
		backup="/etc/v2ray/233blog_v2ray_backup.txt"
		while :; do
			echo
			read -p "$(echo -e "是否卸载 ${yellow}V2Ray$none [${magenta}Y/N$none]:")" uninstall_v2ray_ask
			if [[ -z $uninstall_v2ray_ask ]]; then
				error
			else
				case $uninstall_v2ray_ask in
				Y | y)
					is_uninstall_v2ray=true
					echo
					echo -e "$yellow 卸载 V2Ray = ${cyan}是${none}"
					echo
					break
					;;
				N | n)
					echo
					echo -e "$red 卸载已取消...$none"
					echo
					break
					;;
				*)
					error
					;;
				esac
			fi
		done
		if [[ $(sed -n '29p' $backup) == "true" ]]; then
			caddy_installed=true
		fi

		if [[ $caddy_installed ]] && [[ -f /usr/local/bin/caddy && -f /etc/caddy/Caddyfile ]]; then
			while :; do
				echo
				read -p "$(echo -e "是否卸载 ${yellow}Caddy$none [${magenta}Y/N$none]:")" uninstall_caddy_ask
				if [[ -z $uninstall_caddy_ask ]]; then
					error
				else
					case $uninstall_caddy_ask in
					Y | y)
						is_uninstall_caddy=true
						echo
						echo -e "$yellow 卸载 Caddy = ${cyan}是${none}"
						echo
						break
						;;
					N | n)
						echo
						echo -e "$yellow 卸载 Caddy = ${cyan}否${none}"
						echo
						break
						;;
					*)
						error
						;;
					esac
				fi
			done
		fi

		if [[ $is_uninstall_v2ray && $is_uninstall_caddy ]]; then
			pause
			echo

			shadowsocks=$(sed -n '31p' $backup)

			if [[ $shadowsocks == "true" ]]; then
				ssport=$(sed -n '33p' $backup)
				del_port $ssport
			fi

			v2ray_transport_opt=$(sed -n '17p' $backup)
			v2ray_port=$(sed -n '19p' $backup)
			if [[ $v2ray_transport_opt == "4" ]]; then
				del_port "80"
				del_port "443"
				del_port $v2ray_port
			elif [[ $v2ray_transport_opt -ge 9 ]]; then
				del_port $v2ray_port
				del_port "multiport"
			else
				del_port $v2ray_port
			fi

			[ $cmd == "apt-get" ] && rm -rf /etc/network/if-pre-up.d/iptables

			v2ray_pid=$(ps ux | grep "/usr/bin/v2ray/v2ray" | grep -v grep | awk '{print $2}')
			# [ $v2ray_pid ] && systemctl stop v2ray
			[ $v2ray_pid ] && do_service stop v2ray

			rm -rf /usr/bin/v2ray
			rm -rf /usr/local/bin/v2ray
			rm -rf /etc/v2ray
			rm -rf /var/log/v2ray

			caddy_pid=$(pgrep "caddy")
			# [ $caddy_pid ] && systemctl stop caddy
			[ $caddy_pid ] && do_service stop caddy
			rm -rf /usr/local/bin/caddy
			rm -rf /etc/caddy
			rm -rf /etc/ssl/caddy

			if [[ $systemd ]]; then
				systemctl disable v2ray >/dev/null 2>&1
				rm -rf /lib/systemd/system/v2ray.service
				systemctl disable caddy >/dev/null 2>&1
				rm -rf /lib/systemd/system/caddy.service
			else
				update-rc.d -f caddy remove >/dev/null 2>&1
				update-rc.d -f v2ray remove >/dev/null 2>&1
				rm -rf /etc/init.d/caddy
				rm -rf /etc/init.d/v2ray
			fi

			# clear
			echo
			echo -e "$green V2Ray 卸载完成啦 ....$none"
			echo
			echo "如果你觉得这个脚本有哪些地方不够好的话...请告诉我"
			echo
			echo "反馈问题: https://github.com/233boy/v2ray/issus"
			echo

		elif [[ $is_uninstall_v2ray ]]; then
			pause
			echo

			shadowsocks=$(sed -n '31p' $backup)

			if [[ $shadowsocks == "true" ]]; then
				ssport=$(sed -n '33p' $backup)
				del_port $ssport
			fi

			v2ray_transport_opt=$(sed -n '17p' $backup)
			v2ray_port=$(sed -n '19p' $backup)
			if [[ $v2ray_transport_opt == "4" ]]; then
				del_port "80"
				del_port "443"
				del_port $v2ray_port
			elif [[ $v2ray_transport_opt -ge 9 ]]; then
				del_port $v2ray_port
				del_port "multiport"
			else
				del_port $v2ray_port
			fi

			[ $cmd == "apt-get" ] && rm -rf /etc/network/if-pre-up.d/iptables

			v2ray_pid=$(ps ux | grep "/usr/bin/v2ray/v2ray" | grep -v grep | awk '{print $2}')
			# [ $v2ray_pid ] && systemctl stop v2ray
			[ $v2ray_pid ] && do_service stop v2ray
			rm -rf /usr/bin/v2ray
			rm -rf /usr/local/bin/v2ray
			rm -rf /etc/v2ray
			rm -rf /var/log/v2ray
			if [[ $systemd ]]; then
				systemctl disable v2ray >/dev/null 2>&1
				rm -rf /lib/systemd/system/v2ray.service
			else
				update-rc.d -f v2ray remove >/dev/null 2>&1
				rm -rf /etc/init.d/v2ray
			fi
			# clear
			echo
			echo -e "$green V2Ray 卸载完成啦 ....$none"
			echo
			echo "如果你觉得这个脚本有哪些地方不够好的话...请告诉我"
			echo
			echo "反馈问题: https://github.com/233boy/v2ray/issus"
			echo

		fi
	else
		echo -e "
		$red 大胸弟...你貌似毛有安装 V2Ray ....卸载个鸡鸡哦...$none

		备注...仅支持卸载使用我 (v2ray66.com) 提供的 V2Ray 一键安装脚本
		" && exit 1
	fi

}

args=$1
[ -z $1 ] && args="online"
case $args in
online)
	#hello world
	;;
local)
	local_install=true
	;;
*)
	echo
	echo -e " 大佬...你输入的这个参数 <$red $args $none> ...这个是什么鬼啊...脚本不认识它哇"
	echo
	echo -e " 这个辣鸡脚本仅支持输入$green local / online $none参数"
	echo
	echo -e " 输入$yellow local $none即是使用本地安装"
	echo
	echo -e " 输入$yellow online $none即是使用在线安装 (默认)"
	echo
	exit 1
	;;
esac

clear
while :; do
	echo
	echo "........... V2Ray 一键安装脚本 & 管理脚本 by v2ray66.com .........."
	echo
	echo "帮助说明: https://v2ray66.com/post/1/"
	echo
	echo "搭建教程: https://v2ray66.com/post/2/"
	echo
	echo " 1. 安装"
	echo
	echo " 2. 卸载"
	echo
	if [[ $local_install ]]; then
		echo -e "$yellow 温馨提示.. 本地安装已启用 ..$none"
		echo
	fi
	read -p "$(echo -e "请选择 [${magenta}1-2$none]:")" choose
	case $choose in
	1)
		install
		break
		;;
	2)
		uninstall
		break
		;;
	*)
		error
		;;
	esac
done