@ -10,7 +10,7 @@ none='\e[0m'
# Root # Root
[ [ $( id -u) != 0 ] ] && echo -e " 哎呀……请使用 ${ red } root ${ none } 用户运行 ${ yellow } ~(^_^) ${ none } " && exit 1 [ [ $( id -u) != 0 ] ] && echo -e " 哎呀……请使用 ${ red } root ${ none } 用户运行 ${ yellow } ~(^_^) ${ none } " && exit 1
_version = "v1.69 " _version = "v2.0 "
cmd = "apt-get" cmd = "apt-get"
@ -42,46 +42,41 @@ else
fi fi
backup = "/etc/v2ray/233blog_v2ray_backup.txt " backup = "/etc/v2ray/233blog_v2ray_backup.conf "
if [ [ -f /usr/bin/v2ray/v2ray && -f /etc/v2ray/config.json ] ] && [ [ -f $backup && -d /etc/v2ray/233boy/v2ray ] ] ; then if [ [ -f /usr/bin/v2ray/v2ray && -f /etc/v2ray/config.json ] ] && [ [ -f $backup && -d /etc/v2ray/233boy/v2ray ] ] ; then
v2ray_transport = $( sed -n '17p' $backup ) . $backup
v2ray_port = $( sed -n '19p' $backup )
v2ray_id = $( sed -n '21p' $backup )
v2ray_dynamicPort_start = $( sed -n '23p' $backup )
v2ray_dynamicPort_end = $( sed -n '25p' $backup )
domain = $( sed -n '27p' $backup )
caddy_status = $( sed -n '29p' $backup )
shadowsocks_status = $( sed -n '31p' $backup )
ssport = $( sed -n '33p' $backup )
sspass = $( sed -n '35p' $backup )
ssciphers = $( sed -n '37p' $backup )
blocked_ad_status = $( sed -n '39p' $backup )
ws_path_status = $( sed -n '41p' $backup )
ws_path = $( sed -n '43p' $backup )
alterId = $( sed -n '45p' $backup )
v2ray_ver = $( /usr/bin/v2ray/v2ray -version | head -n 1 | cut -d " " -f2) v2ray_ver = $( /usr/bin/v2ray/v2ray -version | head -n 1 | cut -d " " -f2)
elif [ [ -f /usr/bin/v2ray/v2ray && -f /etc/v2ray/config.json ] ] && [ [ -f /etc/v2ray/233blog_v2ray_backup.txt && -d /etc/v2ray/233boy/v2ray ] ] ; then
cp -f /etc/v2ray/233boy/v2ray/v2ray.old.sh /usr/local/bin/v2ray
chmod +x /usr/local/bin/v2ray
echo
echo -e " 哇哦.. 出现了一点小意外.. 当前环境不能使用 $cyan v2.0 $nonet版本以上的管理脚本 .. 已自动回退到旧版本 "
echo
echo -e " 请使用命令 $yellow v2ray reload $none重新加载配置 ...以避免发生莫名其妙的问题 "
echo
exit 1
else else
echo -e " 哎呀哎呀…… ${ red } 出错咯...请重新安装V2Ray ${ none } ${ yellow } ~(^_^) ${ none } " && exit 1 echo -e " 哎呀哎呀…… ${ red } 出错咯...请重新安装V2Ray ${ none } ${ yellow } ~(^_^) ${ none } " && exit 1
fi fi
if [ [ $caddy_status = = "true" ] ] ; then if [ [ $caddy_status ] ] ; then
caddy_installed = true caddy_installed = true
fi fi
if [ [ $shadowsocks_status = = "true" ] ] ; then if [ [ $shadowsocks_status ] ] ; then
shadowsocks = true shadowsocks = true
fi fi
if [ [ $blocked_ad_status = = "true" ] ] ; then if [ [ $blocked_ad_status ] ] ; then
is_blocked_ad = true is_blocked_ad = true
fi fi
if [ [ $v2ray_transport -ge 9 ] ] ; then if [ [ $v2ray_transport -ge 9 ] ] ; then
dynamicPort = true dynamicPort = true
port_range = " ${ v2ray_dynamicPort_start } - ${ v2ray_dynamicPort_end } " port_range = " ${ v2ray_dynamicPort_start } - ${ v2ray_dynamicPort_end } "
fi fi
if [ [ $ws_path_status = = "true" ] ] ; then if [ [ $ws_path_status ] ] ; then
is_ws_path = true is_ws_path = true
fi fi
@ -536,9 +531,9 @@ shadowsocks_password_config() {
read -p " $( echo -e " (默认密码: ${ cyan } 233blog.com $none ) " ) : " new_sspass read -p " $( echo -e " (默认密码: ${ cyan } 233blog.com $none ) " ) : " new_sspass
[ -z " $new_sspass " ] && new_sspass = "233blog.com" [ -z " $new_sspass " ] && new_sspass = "233blog.com"
case $new_sspass in case $new_sspass in
*/ *) *[ /$] )
echo echo
echo -e " 由于这个脚本太辣鸡了..所以密码不能包括 $red / $none 这个符号.... " echo -e " 由于这个脚本太辣鸡了..所以密码不能包含 $red / $none或 $red $ $none 这两 个符号 "
echo echo
error error
; ; ; ;
@ -627,7 +622,8 @@ change_shadowsocks_port() {
echo "----------------------------------------------------------------" echo "----------------------------------------------------------------"
echo echo
pause pause
sed -i " 33s/ $ssport / $new_ssport / " $backup # sed -i "45s/=$ssport/=$new_ssport/" $backup
backup_config ssport
del_port $ssport del_port $ssport
open_port $new_ssport open_port $new_ssport
ssport = $new_ssport ssport = $new_ssport
@ -657,9 +653,9 @@ change_shadowsocks_password() {
echo " 跟当前密码一毛一样....修改个鸡鸡哦" echo " 跟当前密码一毛一样....修改个鸡鸡哦"
error error
; ; ; ;
*/ *) *[ /$] )
echo echo
echo -e " 由于这个脚本太辣鸡了..所以密码不能包括 $red / $none 这个符号.... " echo -e " 由于这个脚本太辣鸡了..所以密码不能包含 $red / $none或 $red $ $none 这两 个符号 "
echo echo
error error
; ; ; ;
@ -670,7 +666,8 @@ change_shadowsocks_password() {
echo "----------------------------------------------------------------" echo "----------------------------------------------------------------"
echo echo
pause pause
sed -i " 35s/ $sspass / $new_sspass / " $backup # sed -i "48s/=$sspass/=$new_sspass/" $backup
backup_config sspass
sspass = $new_sspass sspass = $new_sspass
config config
clear clear
@ -710,7 +707,8 @@ change_shadowsocks_ciphers() {
echo "----------------------------------------------------------------" echo "----------------------------------------------------------------"
echo echo
pause pause
sed -i " 37s/ $ssciphers / $new_ssciphers / " $backup # sed -i "51s/=$ssciphers/=$new_ssciphers/" $backup
backup_config ssciphers
ssciphers = $new_ssciphers ssciphers = $new_ssciphers
config config
clear clear
@ -740,7 +738,8 @@ disable_shadowsocks() {
echo "----------------------------------------------------------------" echo "----------------------------------------------------------------"
echo echo
pause pause
sed -i "31s/true/false/" $backup # sed -i "31s/true/false/" $backup
backup_config -ss
del_port $ssport del_port $ssport
shadowsocks = '' shadowsocks = ''
config config
@ -878,7 +877,8 @@ change_v2ray_port() {
echo "----------------------------------------------------------------" echo "----------------------------------------------------------------"
echo echo
pause pause
sed -i " 19s/ $v2ray_port / $v2ray_port_opt / " $backup # sed -i "19s/$v2ray_port/$v2ray_port_opt/" $backup
backup_config v2ray_port
del_port $v2ray_port del_port $v2ray_port
open_port $v2ray_port_opt open_port $v2ray_port_opt
v2ray_port = $v2ray_port_opt v2ray_port = $v2ray_port_opt
@ -1024,13 +1024,15 @@ change_v2ray_transport() {
fi fi
fi fi
if [ [ $is_ws_path ] ] ; then if [ [ $is_ws_path ] ] ; then
sed -i "41s/true/false/" $backup # sed -i "41s/true/false/" $backup
backup_config -ws_path
fi fi
elif [ [ $v2ray_transport -ge 9 ] ] ; then elif [ [ $v2ray_transport -ge 9 ] ] ; then
del_port "multiport" del_port "multiport"
fi fi
open_port "multiport" open_port "multiport"
sed -i " 17s/ $v2ray_transport / $v2ray_transport_opt /; 23s/ $v2ray_dynamicPort_start / $v2ray_dynamic_port_start_input /; 25s/ $v2ray_dynamicPort_end / $v2ray_dynamic_port_end_input / " $backup # sed -i "17s/$v2ray_transport/$v2ray_transport_opt/; 23s/$v2ray_dynamicPort_start/$v2ray_dynamic_port_start_input/; 25s/$v2ray_dynamicPort_end/$v2ray_dynamic_port_end_input/" $backup
backup_config v2ray_transport v2ray_dynamicPort_start v2ray_dynamicPort_end
port_range = " ${ v2ray_dynamic_port_start_input } - ${ v2ray_dynamic_port_end_input } " port_range = " ${ v2ray_dynamic_port_start_input } - ${ v2ray_dynamic_port_end_input } "
config config
clear clear
@ -1038,7 +1040,8 @@ change_v2ray_transport() {
view_v2ray_config_info view_v2ray_config_info
download_v2ray_config_ask download_v2ray_config_ask
else else
sed -i " 17s/ $v2ray_transport / $v2ray_transport_opt / " $backup # sed -i "17s/$v2ray_transport/$v2ray_transport_opt/" $backup
backup_config v2ray_transport
if [ [ $v2ray_transport = = 4 ] ] ; then if [ [ $v2ray_transport = = 4 ] ] ; then
del_port "80" del_port "80"
del_port "443" del_port "443"
@ -1058,7 +1061,8 @@ change_v2ray_transport() {
fi fi
fi fi
if [ [ $is_ws_path ] ] ; then if [ [ $is_ws_path ] ] ; then
sed -i "41s/true/false/" $backup # sed -i "41s/true/false/" $backup
backup_config -ws_path
fi fi
elif [ [ $v2ray_transport -ge 9 ] ] ; then elif [ [ $v2ray_transport -ge 9 ] ] ; then
del_port "multiport" del_port "multiport"
@ -1121,11 +1125,14 @@ ws_config() {
ws_path_config_ask ws_path_config_ask
pause pause
domain_check domain_check
sed -i " 17s/ $v2ray_transport / $v2ray_transport_opt /; 27s/ $domain / $new_domain / " $backup # sed -i "17s/$v2ray_transport/$v2ray_transport_opt/; 27s/$domain/$new_domain/" $backup
backup_config v2ray_transport domain
if [ [ $new_ws_path ] ] ; then if [ [ $new_ws_path ] ] ; then
sed -i " 41s/false/true/; 43s/ $ws_path / $new_ws_path /; $ d " $backup # sed -i "41s/false/true/; 43s/$ws_path/$new_ws_path/; $ d" $backup
echo " $proxy_site " >>$backup # echo "$proxy_site" >>$backup
backup_config +ws_path
ws_path = $new_ws_path ws_path = $new_ws_path
proxy_site = $new_proxy_site
is_ws_path = true is_ws_path = true
fi fi
@ -1176,11 +1183,14 @@ ws_config() {
ws_path_config_ask ws_path_config_ask
pause pause
domain_check domain_check
sed -i " 17s/ $v2ray_transport / $v2ray_transport_opt /; 27s/ $domain / $new_domain /; 29s/false/true/ " $backup # sed -i "17s/$v2ray_transport/$v2ray_transport_opt/; 27s/$domain/$new_domain/; 29s/false/true/" $backup
backup_config v2ray_transport domain caddy
if [ [ $new_ws_path ] ] ; then if [ [ $new_ws_path ] ] ; then
sed -i " 41s/false/true/; 43s/ $ws_path / $new_ws_path /; $ d " $backup # sed -i "41s/false/true/; 43s/$ws_path/$new_ws_path/; $ d" $backup
echo " $proxy_site " >>$backup # echo "$proxy_site" >>$backup
backup_config +ws_path
ws_path = $new_ws_path ws_path = $new_ws_path
proxy_site = $new_proxy_site
is_ws_path = true is_ws_path = true
fi fi
if [ [ $v2ray_transport -ge 9 ] ] ; then if [ [ $v2ray_transport -ge 9 ] ] ; then
@ -1206,7 +1216,8 @@ ws_config() {
echo echo
pause pause
domain_check domain_check
sed -i " 17s/ $v2ray_transport / $v2ray_transport_opt /; 27s/ $domain / $new_domain / " $backup # sed -i "17s/$v2ray_transport/$v2ray_transport_opt/; 27s/$domain/$new_domain/" $backup
backup_config v2ray_transport domain
if [ [ $v2ray_transport -ge 9 ] ] ; then if [ [ $v2ray_transport -ge 9 ] ] ; then
del_port "multiport" del_port "multiport"
fi fi
@ -1263,9 +1274,9 @@ ws_path_config() {
[ [ -z $new_ws_path ] ] && new_ws_path = "233blog" [ [ -z $new_ws_path ] ] && new_ws_path = "233blog"
case $new_ws_path in case $new_ws_path in
*/ *) *[ /$] )
echo echo
echo -e " 由于这个脚本太辣鸡了..所以不能包含 $red / $none 这个符号.... " echo -e " 由于这个脚本太辣鸡了..所以分流的路径 不能包含 $red / $none或 $red $ $none 这两 个符号 "
echo echo
error error
; ; ; ;
@ -1285,18 +1296,24 @@ proxy_site_config() {
echo echo
while :; do while :; do
echo -e " 请输入 ${ magenta } 一个正确的 $none ${ cyan } 网址 $none 用来作为 ${ cyan } 网站的伪装 $none , 例如 https://liyafly.com " echo -e " 请输入 ${ magenta } 一个正确的 $none ${ cyan } 网址 $none 用来作为 ${ cyan } 网站的伪装 $none , 例如 https://liyafly.com "
echo -e " 举例...你当前的域名是 $green $domain $none , 伪装的网址的是 https://liyafly.com " echo -e " 举例...假设 你当前的域名是 $green $domain $none , 伪装的网址的是 https://liyafly.com "
echo -e "然后打开你的域名时候...显示出来的内容就是来自 https://liyafly.com 的内容" echo -e "然后打开你的域名时候...显示出来的内容就是来自 https://liyafly.com 的内容"
echo -e "其实就是一个反代...明白就好..." echo -e "其实就是一个反代...明白就好..."
echo -e "如果不能伪装成功...可以使用 v2ray config 修改伪装的网址" echo -e "如果不能伪装成功...可以使用 v2ray config 修改伪装的网址"
read -p " $( echo -e " (默认: [ ${ cyan } https://liyafly.com $none ]): " ) " proxy_site read -p " $( echo -e " (默认: [ ${ cyan } https://liyafly.com $none ]): " ) " new_ proxy_site
[ [ -z $proxy_site ] ] && proxy_site = "https://liyafly.com" [ [ -z $new_ proxy_site ] ] && new_ proxy_site= "https://liyafly.com"
case $proxy_site in case $new_proxy_site in
*[ #$]*)
echo
echo -e " 由于这个脚本太辣鸡了..所以伪装的网址不能包含 $red # $none或 $red $ $none这两个符号 .... "
echo
error
; ;
*) *)
echo echo
echo echo
echo -e " $yellow 伪装的网址 = ${ cyan } ${ proxy_site } $none " echo -e " $yellow 伪装的网址 = ${ cyan } ${ new_ proxy_site} $none "
echo "----------------------------------------------------------------" echo "----------------------------------------------------------------"
echo echo
break break
@ -1363,7 +1380,7 @@ install_caddy() {
caddy_config( ) { caddy_config( ) {
local email = $( shuf -i1-10000000000 -n1) local email = $( shuf -i1-10000000000 -n1)
if [ [ $is_ws_path ] ] ; then if [ [ $is_ws_path ] ] ; then
[ [ -z $proxy_site ] ] && proxy_site = $( sed '$!d' $backup ) # [[ -z $proxy_site ]] && proxy_site=$(sed '$!d' $backup )
cat >/etc/caddy/Caddyfile <<-EOF cat >/etc/caddy/Caddyfile <<-EOF
$domain { $domain {
tls ${ email } @gmail.com tls ${ email } @gmail.com
@ -1485,12 +1502,13 @@ change_v2ray_dynamicport() {
pause pause
del_port "multiport" del_port "multiport"
open_port "multiport" open_port "multiport"
sed -i " 23s/ $v2ray_dynamicPort_start / $v2ray_dynamic_port_start_input /; 25s/ $v2ray_dynamicPort_end / $v2ray_dynamic_port_end_input / " $backup # sed -i "23s/$v2ray_dynamicPort_start/$v2ray_dynamic_port_start_input/; 25s/$v2ray_dynamicPort_end/$v2ray_dynamic_port_end_input/" $backup
backup_config v2ray_dynamicPort_start v2ray_dynamicPort_end
port_range = " ${ v2ray_dynamic_port_start_input } - ${ v2ray_dynamic_port_end_input } " port_range = " ${ v2ray_dynamic_port_start_input } - ${ v2ray_dynamic_port_end_input } "
config config
# clear # clear
echo echo
echo -e " $green 动态端口修改成功啦...你不需要修改 V2Ray 客户端配置...保持原有的配置即可... echo -e " $green 动态端口修改成功啦...你不需要修改 V2Ray 客户端配置...保持原有的配置即可... $none
echo echo
else else
echo echo
@ -1625,7 +1643,8 @@ change_v2ray_id() {
echo "----------------------------------------------------------------" echo "----------------------------------------------------------------"
echo echo
pause pause
sed -i " 21s/ $v2ray_id / $uuid /; " $backup # sed -i "21s/$v2ray_id/$uuid/;" $backup
backup_config uuid
v2ray_id = $uuid v2ray_id = $uuid
config config
clear clear
@ -1687,7 +1706,8 @@ change_domain() {
echo echo
pause pause
domain_check domain_check
sed -i " 27s/ $domain / $new_domain / " $backup # sed -i "27s/$domain/$new_domain/" $backup
backup_config domain
domain = $new_domain domain = $new_domain
caddy_config caddy_config
config config
@ -1732,9 +1752,9 @@ change_ws_path_config() {
echo echo
error error
; ; ; ;
*/ *) *[ /$] )
echo echo
echo -e " 由于这个脚本太辣鸡了..所以不能包含 $red / $none 这个符号.... " echo -e " 由于这个脚本太辣鸡了..所以分流的路径 不能包含 $red / $none或 $red $ $none 这两 个符号 "
echo echo
error error
; ; ; ;
@ -1749,7 +1769,8 @@ change_ws_path_config() {
esac esac
done done
pause pause
sed -i " 43s/ $ws_path / $new_ws_path / " $backup # sed -i "43s/$ws_path/$new_ws_path/" $backup
backup_config ws_path
ws_path = $new_ws_path ws_path = $new_ws_path
caddy_config caddy_config
config config
@ -1759,9 +1780,11 @@ change_ws_path_config() {
elif [ [ $v2ray_transport = = 4 && $caddy_installed ] ] ; then elif [ [ $v2ray_transport = = 4 && $caddy_installed ] ] ; then
ws_path_config_ask ws_path_config_ask
if [ [ $new_ws_path ] ] ; then if [ [ $new_ws_path ] ] ; then
sed -i " 41s/false/true/; 43s/ $ws_path / $new_ws_path /; $ d " $backup # sed -i "41s/false/true/; 43s/$ws_path/$new_ws_path/; $ d" $backup
echo " $proxy_site " >>$backup # echo "$proxy_site" >>$backup
backup_config +ws_path
ws_path = $new_ws_path ws_path = $new_ws_path
proxy_site = $new_proxy_site
is_ws_path = true is_ws_path = true
caddy_config caddy_config
config config
@ -1802,14 +1825,20 @@ change_proxy_site_config() {
echo -e "然后打开你的域名时候...显示出来的内容就是来自 https://liyafly.com 的内容" echo -e "然后打开你的域名时候...显示出来的内容就是来自 https://liyafly.com 的内容"
echo -e "其实就是一个反代...明白就好..." echo -e "其实就是一个反代...明白就好..."
echo -e "如果不能伪装成功...可以使用 v2ray config 修改伪装的网址" echo -e "如果不能伪装成功...可以使用 v2ray config 修改伪装的网址"
read -p " $( echo -e " (当前伪装的网址: [ ${ cyan } $( sed '$!d' $backup ) $none ]): " ) " proxy_site read -p " $( echo -e " (当前伪装的网址: [ ${ cyan } ${ proxy_site } $none ]): " ) " new_ proxy_site
[ [ -z $proxy_site ] ] && error && continue [ [ -z $new_ proxy_site ] ] && error && continue
case $proxy_site in case $new_proxy_site in
*[ #$]*)
echo
echo -e " 由于这个脚本太辣鸡了..所以伪装的网址不能包含 $red # $none或 $red $ $none这两个符号 .... "
echo
error
; ;
*) *)
echo echo
echo echo
echo -e " $yellow 伪装的网址 = ${ cyan } ${ proxy_site } $none " echo -e " $yellow 伪装的网址 = ${ cyan } ${ new_ proxy_site} $none "
echo "----------------------------------------------------------------" echo "----------------------------------------------------------------"
echo echo
break break
@ -1817,8 +1846,10 @@ change_proxy_site_config() {
esac esac
done done
pause pause
sed -i " $ d " $backup # sed -i "$ d" $backup
echo " $proxy_site " >>$backup # echo "$proxy_site" >>$backup
backup_config proxy_site
proxy_site = $new_proxy_site
caddy_config caddy_config
echo echo
echo echo
@ -1830,9 +1861,11 @@ change_proxy_site_config() {
elif [ [ $v2ray_transport = = 4 && $caddy_installed ] ] ; then elif [ [ $v2ray_transport = = 4 && $caddy_installed ] ] ; then
ws_path_config_ask ws_path_config_ask
if [ [ $new_ws_path ] ] ; then if [ [ $new_ws_path ] ] ; then
sed -i " 41s/false/true/; 43s/ $ws_path / $new_ws_path /; $ d " $backup # sed -i "41s/false/true/; 43s/$ws_path/$new_ws_path/; $ d" $backup
echo " $proxy_site " >>$backup # echo "$proxy_site" >>$backup
backup_config +ws_path
ws_path = $new_ws_path ws_path = $new_ws_path
proxy_site = $new_proxy_site
is_ws_path = true is_ws_path = true
caddy_config caddy_config
config config
@ -1895,7 +1928,8 @@ disable_ws_path() {
echo "----------------------------------------------------------------" echo "----------------------------------------------------------------"
echo echo
pause pause
sed -i "41s/true/false/" $backup # sed -i "41s/true/false/" $backup
backup_config -ws_path
is_ws_path = '' is_ws_path = ''
caddy_config caddy_config
config config
@ -1972,7 +2006,8 @@ blocked_hosts() {
echo "----------------------------------------------------------------" echo "----------------------------------------------------------------"
echo echo
pause pause
sed -i "39s/false/true/" $backup # sed -i "39s/false/true/" $backup
backup_config +ad
is_blocked_ad = true is_blocked_ad = true
config config
echo echo
@ -1990,7 +2025,8 @@ blocked_hosts() {
echo "----------------------------------------------------------------" echo "----------------------------------------------------------------"
echo echo
pause pause
sed -i "39s/true/false/" $backup # sed -i "39s/true/false/" $backup
backup_config -ad
is_blocked_ad = '' is_blocked_ad = ''
config config
echo echo
@ -2019,14 +2055,21 @@ change_v2ray_alterId() {
read -p " $( echo -e " (当前数值是: ${ cyan } $alterId $none ): " ) " new_alterId read -p " $( echo -e " (当前数值是: ${ cyan } $alterId $none ): " ) " new_alterId
[ [ -z $new_alterId ] ] && error && continue [ [ -z $new_alterId ] ] && error && continue
case $new_alterId in case $new_alterId in
0 | [ 1-9] | [ 1-9] [ 0-9] | [ 1-9] [ 0-9] [ 0-9] | [ 1-9] [ 0-9] [ 0-9] [ 0-9] | [ 1-5] [ 0-9] [ 0-9] [ 0-9] [ 0-9] | 6[ 0-4] [ 0-9] [ 0-9] [ 0-9] | 65[ 0-4] [ 0-9] [ 0-9] | 655[ 0-3] [ 0-5] ) $alterId )
echo
echo -e " 大佬...跟 当前 alterId 一毛一样啊...修改个鸡鸡哦 "
echo
error
; ;
[ 0-9] | [ 1-9] [ 0-9] | [ 1-9] [ 0-9] [ 0-9] | [ 1-9] [ 0-9] [ 0-9] [ 0-9] | [ 1-5] [ 0-9] [ 0-9] [ 0-9] [ 0-9] | 6[ 0-4] [ 0-9] [ 0-9] [ 0-9] | 65[ 0-4] [ 0-9] [ 0-9] | 655[ 0-3] [ 0-5] )
echo echo
echo echo
echo -e " $yellow alterId = $cyan $new_alterId $none " echo -e " $yellow alterId = $cyan $new_alterId $none "
echo "----------------------------------------------------------------" echo "----------------------------------------------------------------"
echo echo
pause pause
sed -i " 45s/ $alterId / $new_alterId / " $backup # sed -i "45s/$alterId/$new_alterId/" $backup
backup_config alterId
alterId = $new_alterId alterId = $new_alterId
config config
clear clear
@ -3422,7 +3465,8 @@ config() {
if [ [ $new_shadowsocks ] ] ; then if [ [ $new_shadowsocks ] ] ; then
open_port $new_ssport open_port $new_ssport
sed -i " 31s/false/true/; 33s/ $ssport / $new_ssport /; 35s/ $sspass / $new_sspass /; 37s/ $ssciphers / $new_ssciphers / " $backup # sed -i "31s/false/true/; 33s/$ssport/$new_ssport/; 35s/$sspass/$new_sspass/; 37s/$ssciphers/$new_ssciphers/" $backup
backup_config +ss
fi fi
if [ [ $v2ray_port = = "80" ] ] ; then if [ [ $v2ray_port = = "80" ] ] ; then
@ -3436,6 +3480,70 @@ config() {
fi fi
do_service restart v2ray do_service restart v2ray
} }
backup_config( ) {
for keys in $* ; do
case $keys in
v2ray_transport)
sed -i " 18s/= $v2ray_transport /= $v2ray_transport_opt / " $backup
; ;
v2ray_port)
sed -i " 21s/= $v2ray_port /= $v2ray_port_opt / " $backup
; ;
uuid)
sed -i " 24s/= $v2ray_id /= $uuid / " $backup
; ;
alterId)
sed -i " 27s/= $alterId /= $new_alterId / " $backup
; ;
v2ray_dynamicPort_start)
sed -i " 30s/= $v2ray_dynamicPort_start /= $v2ray_dynamic_port_start_input / " $backup
; ;
v2ray_dynamicPort_end)
sed -i " 33s/= $v2ray_dynamicPort_end /= $v2ray_dynamic_port_end_input / " $backup
; ;
domain)
sed -i " 36s/= $domain /= $new_domain / " $backup
; ;
caddy)
sed -i "39s/=/=true/" $backup
; ;
+ss)
sed -i " 42s/=/=true/; 45s/= $ssport /= $new_ssport /; 48s/= $sspass /= $new_sspass /; 51s/= $ssciphers /= $new_ssciphers / " $backup
; ;
-ss)
sed -i "42s/=true/=/" $backup
; ;
ssport)
sed -i " 45s/= $ssport /= $new_ssport / " $backup
; ;
sspass)
sed -i " 48s/= $sspass /= $new_sspass / " $backup
; ;
ssciphers)
sed -i " 51s/= $ssciphers /= $new_ssciphers / " $backup
; ;
+ad)
sed -i "54s/=/=true/" $backup
; ;
-ad)
sed -i "54s/=true/=/" $backup
; ;
+ws_path)
sed -i " 57s/=/=true/; 60s/= $ws_path /= $new_ws_path /; 63s#= $proxy_site #= $new_proxy_site # " $backup
; ;
-ws_path)
sed -i "57s/=true/=/" $backup
; ;
ws_path)
sed -i " 60s/= $ws_path /= $new_ws_path / " $backup
; ;
proxy_site)
sed -i " 63s#= $proxy_site #= $new_proxy_site # " $backup
; ;
esac
done
}
_boom_( ) { _boom_( ) {
echo echo
echo -e " $green ........... V2Ray 配置链接集合 by 233blog.com .......... $none " echo -e " $green ........... V2Ray 配置链接集合 by 233blog.com .......... $none "
@ -3688,6 +3796,7 @@ stop)
stop_v2ray stop_v2ray
; ; ; ;
restart) restart)
[ [ $v2ray_transport = = "4" && $caddy_installed ] ] && do_service restart caddy
restart_v2ray restart_v2ray
; ; ; ;
reload) reload)
233boy
7 years ago